Download - Dental Asia

PRODUCTUPDATE
dentCeram LF Offers Multi-Application Enquiry No. 09/05
The new dentCeram LF ceramic system from Dentaurum
offers a large number of applications for everyday use in the
laboratory. It is suitable for veneering precious metal alloys or
of base metal alloys with high thermal expansion. The very
good modelling properties of this ceramic facilitate rapid, simple
and safe layering. The layering is very stable and thus it is
possible to work quickly. The high stability of the ceramic acts
positively during firing. With dentCeram LF the material does
not run or become misshaped. Developed exclusively for
shading the Dentaurum ceramic material, the thermal coloration
method guarantees homogeneous and permanently stable
shading, even after firing several times. This excellent firing and
shade stability sets new standards.
The product range of the dentCeram LF layering ceramics is
rounded off perfectly with the
new dentCeram LF press. It is a
modern pressed ceramic on the
basis of high purity technical
raw materials. The pressed
ceramic method for single tooth
restorations is distinguished by
easy processing as well as high
stability of the esthetic
substructure material.
All system components of
dentCeram LF have been
matched perfectly to one another in development to guarantee
the highest degree of safety.
All-Round Protection Enquiry No. 10/05
A modern casing with a large display and an upright synthetic
bottle: that is what the new piezo smart ultrasound device by
Mectron looks like. With its over 37
different instruments, the piezo
smart caters for all the traditional
applications: scaling, perio, endo
and restorative. The highlight,
however, is the new non-spill bottle
system.
Mectron has designed the bottle in
such a way that it remains upright
and opens through the top. This
means
that the liquid cannot flow out. The
path of the liquid is kept separate from the electrical
components. The peristaltic pump is protected but accessible at
all times, mounted on the bottom of the device. The fullyautomatic
“Clean” function can by started by pressing a button,
thus excluding any deposits in the circuit from the start.
Control of the quantity of liquid is achieved by means of pushbuttons.
The chosen quantity of liquid is shown on the large
display. The display also indicates the selected ultrasound
performance level.
The feed-back system and the Automatic Protection Control
(APC) function make sure of constant top performance. The
built-in feedback system controls progress of the power level
and adjusts it as needed in only a few hundredths of a
second.
Dental Asia • May / June 2008 59