Reference Guide - Propaq Encore Vital Signs Monitor - Welch Allyn

16 Getting started Welch Allyn Propaq Encore Vital Signs Monitor
You can select up to three waveforms to be shown on the Propaq. When only one
waveform is selected, a trend window automatically appears below the waveform. While
changing Propaq Encore settings, a status window may appear below the waveform.
80
12:45:28 NIBP S 122 T1 102.3 F HR
III
1cm
mV
ART
MON
122
RESP TREND
( 85) 58
TIME HR/PR SpO2 BR ETCO2 INCO2 PA 35/ 18
HH:MM BPM % Br/M mmHg mmHg MCO2 BR
10:00 101 98 11 30 3
9:58 88
35
SRCH 11 31 3 mmHg 12
9:56 93 OFF 5 30 10 SpO2
9:54 91 100 10 30 2 92
PRINT
NXT TRND OXYCRG
Patient waveform and trend information
can be simultaneously displayed, while
numeric values are continuously updated.
Propaq Encore buttons
The four buttons at the sides of the screen are reserved for the most commonly used
functions.
ALARMS
START/STOP
NET OFF
FREEZE/UNFREEZE
MAIN MENU
Silences or resumes alarm tone.
Starts and stops NIBP measurements. The STOP function will
automatically vent the cuff.
Disconnects the monitor from the Acuity network (if
connected).
Freezes or “unfreezes” the waveforms. If only one or two
waveforms are displayed and you press FREEZE, the frozen
waveform(s) are shown along with an active waveform so you
can continue to monitor the patient’s condition.
Pressing MAIN MENU always returns the monitor to the top
level menu.
NET OFF
ALARMS
FREEZE/
UNFREEZE
MAIN MENU
START/STOP
(NIBP)
The five labels
above the
associated
buttons
The five buttons below the screen, and their associated labels located on the screen,
provide access to the menus.
Later in this manual, the notation A , B , C is used as a shorter way to say “Press Button
A, then B, then C.”