Reference Guide - Propaq Encore Vital Signs Monitor - Welch Allyn

20 Getting started Welch Allyn Propaq Encore Vital Signs Monitor
Monitor setup
Setup Menu 1 is accessed by pressing the SETUP button on the Main Menu.
STATSCALE
ALARMS
WAVE SEL
TRENDS
MORE
STATSCALE
ALARMS
WAVE SEL
TRENDS
MORE
NEXT
CHANGE
PRINTER
MORE
CURRENT
SOURCE
SELECTED
SOURCE
SWEEP (mm/s)
ALARM TONE
Automatically readjusts all waveform scales.
Allows access to the Alarms menu.
Allows you to turn on and off desired waveforms or NIBP numerics
for display.
Allows access to the Trend settings and display.
Displays the next setup menu and the following status window:
SETUP
HR/PR RR/BR ( 85)
CURRENT SOURCE : ECG MCO2 PA 35/ 18
SELECTED SOURCE : ART --- MCO2 BR
SWEEP (mm/s) : 12.5 3.13
ALARM TONE : HIGH
35
mmHg
HR/PR TONE : LOW
12
SpO2
PATIENT MODE : ADULT
92
NEXT CHANGE WAVE SEL PRINTER MORE
Selects the next setting in the status window.
Changes the currently selected display setting. (Pressing CHANGE
at PATIENT MODE allows you to choose between Adult, Pediatric,
and Neonatal in a Patient Mode window.)
Allows access to the Printer Menu.
Allows access to the Time/Day window.
When the selected HR/PR source is no longer available, the current
source is the active source with highest priority. The RR/BR source
cannot be manually selected. It will always be CO 2 if CO 2 is active.
Otherwise, it will be ECG/RESP.
The user-selected HR/PR source is displayed along with the HR/PR
source currently being used by the monitor.
The selectable sweep speeds for HR/PR are 12.5, 25, and 50 mm/
sec. The sweep speeds for RR/BR are 3.13, 6.25, and 12.5 mm/sec.
Sets the Alarm Tone volume to HIGH, MEDIUM, or LOW.