Prosthetics Lower Extremities - Kinetech Medical

Lamination Anchors
Lamination Anchor with Threaded Connector
Stainless steel
The 4R111=N Lamination Anchor can be combined with, among others,
the 4R44=L Pyramid Receiver with Threaded Connector to create a
length-adjustable socket connection or with the 4R57=ST Rotation Adapter.
In the latter case, the 4X46=ST Lamination Dummy must be used
during lamination. It must be ordered seperately.
Order no.
Weight
System height
Material
Max. body weight
4R111=N
80 g
13 mm
Stainless steel
150 kg
≤ 150 kg
Only suitable for use in transfemoral prostheses. During the lamination
process, the 4X46 Lamination Dummy should be used, which
has to be ordered separately (see Accessories, page 122).
647G123
Lamination Anchor with Pyramid, rotatable
Stainless steel
Order no.
Weight
System height
Material
Max. body weight
4R116
165 g
2 mm
Stainless steel
150 kg
Only suitable for use in transfemoral prostheses. During the lamination
process, the 4X46 Lamination Dummy should be used, which
has to be ordered separately (see Accessories, page 122).
The 4R87 Pyramid Adapter with Threaded Connectorist is available as an
individual component of 4R89.
Order no.
Weight
System height
Material
4R87
85 g
- 11 mm
Stainless steel
≤ 150 kg
Adapter
647H123
Lamination Anchor with Pyramid Receiver, rotatable
Stainless steel
Order no.
Weight
System height
Material
Max. body weight
4R111
155 g
44 mm
Stainless steel
150 kg
≤ 150 kg
Only suitable for use in transfemoral prostheses. During the lamination
process, the 4X46 Lamination Dummy should be used, which
has to be ordered separately (see Accessories, page 122).
The 4R44=N Pyramid Receiver with Threaded Connector is available as
an individual component of 4R111.
Order no.
Weight
System height
Material
4R44=N
75 g
31 mm
Stainless steel
647G123
Otto Bock HealthCare GmbH | Prosthetics – Lower Extremities | www.ottobock.com 121