Prosthetics Lower Extremities - Kinetech Medical

Accessories for Lamination Anchors
Leg Prostheses
for Children
Modular Lower
Limb Prostheses
Initial/Interim
Prostheses
Alignment
Leg Prostheses
MOBIS®
Prosthetic
Feet
≤ 150 kg
Lamination Anchor with Pyramid Receiver and Angled Anchor Arm
Order no. 4R119
Weight
System height
Material
Max. body weight
160 g
44 mm
Stainless steel
150 kg
Stainless steel
The Lamination Anchor features an angled anchor arm, which is to be
positioned posteriorly. This allows easy positioning of the adapter in order
to achieve optimal prosthetic alignment. The flexion position of the residual
limb/socket is taken into account.
No or only little manual bending is required.
A properly positioned socket connector is the basis for a correct prosthetic
alignment. This in turn is a basic prerequisite for optimal functionality of
the prosthesis and thus for a high fitting quality.
Only suitable for use in transfemoral prostheses. During the lamination
process, the 4X46 Lamination Dummy should be used, which
has to be ordered separately (see Accessories, page 122).
The 4R44=N Pyramid Receiver with Threaded Connector is available as
an individual component of 4R119.
Order no. 4R44=N
Weight
System height
Material
647G476
75 g
31 mm
Stainless steel
Adapter
Accessories
Have to be ordered separately.
4X46 Lamination Dummy
For Lamination Anchors 4R41, 4R89, 4R111, 4R116, 4R43 and 4R111=N
Single components
replacement parts
Order no. 4R41 4R43 4R89 4R111 4R111=N 4R116
506G3=M8x12-V
Set Screw
501Z2=M5x22
Cap Screw
501Z2=M5x30
Cap Screw
4R43
Lamination Anchor with
Threaded Connector
4R87
Pyramid Adapter with
Threaded Connector
4R44=N
Pyramid Receiver
with Threaded Connector
4R111=N
Lamination Anchor with
Threaded Connector
Single component pack Minimum order quantity Can be ordered individually
122 Otto Bock HealthCare GmbH | Prosthetics – Lower Extremities | www.ottobock.com