Prosthetics Lower Extremities - Kinetech Medical

C-Soft and BionicLink
C-Soft
4X180 C-Soft – Autoadaptive Software
for setting C-Leg® and C-Leg®compact
All adjustments of the knee joint – from zero setting to 2nd mode – are
easily done by following a menu-guided process. Clear instructions outline
and illustrate the individual adjustment steps.
During fine-tuning of the maximum load, C-Soft suggests adjustment
values that are based on the software‘s data analysis. The clinician can
either accept these values or adjust them individually. Afterwards, all
adjustment data can be saved, printed for documentation purposes or
reloaded into a knee joint. The data will always be available for reference.
The additional expert mode gives experienced users of the Sliders software
an easy way to make a quick adjustment on one screen.
Adjustments can be made with either the new, wireless Bluetooth
technology of BionicLink (60X3) and the BionicLink PC(60X4) or with a
conventional cable connection (4X83).
647G268
BionicLink
60X3 BionicLink
for connection to C-Leg® or C-Leg®compact
60X4 BionicLink PC
for connection to the computer (USB-Bluetooth adapter)
With the BionicLink Otto Bock introduces the convenience of Bluetooth
technology to C-Leg® or C-Leg®compact users. Now prosthesis users
can move more freely while adjustments are made, since the need for a
cable is eliminated. Thanks to Bluetooth technology, Prosthetists can
concentrate fully on the setting process and on checking the gait pattern.
The BionicLink is used together with autoadaptive C-Soft software. The
60X4 USB-Bluetooth Adapter is absolutely necessary for using the
60X3 BionicLink because the performance of a conventional Bluetooth
receiver is not sufficient.
647H192
Knee Joints
Otto Bock HealthCare GmbH | Prosthetics – Lower Extremities | www.ottobock.com 177