Prosthetics Lower Extremities - Kinetech Medical

Pylon Feet / Mobility Grades 3 + 4
Leg Prostheses
for Children
Modular Lower
Limb Prostheses
Pylons and connection options for the modular system
The higher the body weight, activity level and foot size, the higher the strain on the prosthetic foot.
For the Axtion® DP and Advantage DP2, the pylon is available in two widths – the A and the B pylon. “A“ stands for the
standard width and “B“ for a wider model that can sustain increased strain.
Axtion®DP, Advantage DP2, Springlite® II
Initial/Interim
Prostheses
"A" Pylon
Alignment
Leg Prostheses
"B" Pylon
30 mm
MOBIS®
43 mm
Prosthetic
Feet
Different adapters are available for the proximal connection to the modular system:
• A tube clamp adaptor or a pyramid adaptor is used to connect components with a pyramid adapter or pyramid receiver.
Both sets include the spacer sleeve and glue to connect the pylon to the sleeve. If a pylon is cut too short, the spacer
sleeve can be exchanged for a longer sleeve.
• The adapter for the transtibial fitting (Ø 30 mm) or the 34 mm spacer sleeve is used to connect components to the tube
clamp.
• A socket adapter is used to connect the socket adapter, socket attachment block or lamination disk. The adapters
can be selected with or without thread. Both include the spacer plate.
90 Otto Bock HealthCare GmbH | Prosthetics – Lower Extremities | www.ottobock.com