(NCT) Manual 2010 - Road Safety Authority

More documents

Recommendations

Info

32 AUXILIARY LAMP CONDITION AND POSITION NATIONAL CAR TEST (NCT) MANUAL 2010 Method of Testing 1. 2. Check that each auxiliary lamp fitted is securely and correctly fixed to the vehicle. Check that the switching mechanism is functioning correctly and that any auxiliary lamps set in the headlamp main beam position are extinguished when the headlamp dipped beams are brought into operation. NOTES 1. Where auxiliary lamps are found to be inoperative, this should not be considered a reason for failure. 2. A broken glass on an auxiliary lamp or fog lamp is not a reason for failure unless the crack or break is large enough to insert a sheet of paper as used in the test. Front Fog Lamp ITEM Auxiliary Lamp (Spot or long range lamp) REASONS FOR FAILURE 1 Incorrectly positioned (see page 53). 2 Insecurely mounted. 3 Switch defective. 4 Not white or yellow. 5 Incorrectly positioned (see diagram). 6 Insecurely mounted. 7 Switch defective. 8 Not white or yellow. 9 Auxiliary lamp set in main beam position and does not extinguish when dipped beams are brought into operation. 52
NATIONAL CAR TEST (NCT) MANUAL 2010 32 AUXILIARY LAMP CONDITION AND POSITION 800mm 250mm 53
Page 1 and 2: NATIONAL CAR TEST (NCT) MANUAL 2010
Page 3 and 4: Road Safety Authority National Car
Page 51: NATIONAL CAR TEST (NCT) MANUAL 2010

(NCT) Manual 2010 - Road Safety Authority

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?