(NCT) Manual 2010 - Road Safety Authority
(NCT) Manual 2010 - Road Safety Authority
(NCT) Manual 2010 - Road Safety Authority
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
33<br />
AUXILIARY LAMP AIM<br />
NATIONAL CAR TEST (<strong>NCT</strong>) MANUAL <strong>2010</strong><br />
Method of Testing<br />
Align the headlamp beamsetter in front of each lamp in turn, and determine the direction of the highest intensity of the beam<br />
relative to the plane on which the vehicle is standing.<br />
NOTES<br />
1. The agreed procedure if there are auxiliary and fog lamps installed: Auxiliary light – carry out in the high<br />
beam position.<br />
2. Where a vehicle is fitted with an auxiliary lamp and a fog lamp the requirement is to check both lamps.<br />
Fog Lamp<br />
ITEM<br />
REASONS FOR FAILURE<br />
1 The upper edge of the beam is above the 2% horizontal line.<br />
Auxiliary Lamp<br />
(spot or long range lamp)<br />
2 The hot spot centre does not lie below the 0% horizontal line.<br />
3 The centre of the hot spot does not lie between<br />
the 0% and 2% vertical lines.<br />
54