User Manual
User Manual
User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
overview<br />
Inside<br />
3<br />
Item<br />
Description<br />
Alarm In / Out<br />
terminals<br />
ALARM IN<br />
ALARM OUT<br />
ALARM COM<br />
GND<br />
Used to connect the alarm input signal.<br />
Used to connect the alarm output signal.<br />
Common port where the alarm output signal is connected.<br />
Used for earth-grounding.<br />
SD Memory Card<br />
Compartment<br />
Reset Button<br />
Compartment for the SD memory card.<br />
Resets the camera settings to the default. Press and hold it for about 5<br />
seconds to turn off the system indicator and restart the system.<br />
J Resetting the camera requires reconfiguration of network settings (IP<br />
address, subnet mask, gateway address etc.) using the IP Installer<br />
software application.<br />
22_ overview