09.11.2014 Views

CoreSight SoC Technical Reference Manual - ARM Information Center

CoreSight SoC Technical Reference Manual - ARM Information Center

CoreSight SoC Technical Reference Manual - ARM Information Center

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Programmers Model<br />

3.3 GPR register descriptions<br />

This section describes the GPR registers. Table 3-1 on page 3-3 provides cross-references to<br />

individual registers.<br />

3.3.1 Debug Power Request Register<br />

The CPWRUPREQ Register characteristics are:<br />

Purpose<br />

Controls the values of the cpwrupreq outputs from CXGPR. Each bit in<br />

this register controls the corresponding output on the cpwrupreq port.<br />

CXGPR contains hardware logic to ensure that the 4-phase handshake is<br />

not violated on the CPWRUP interfaces.<br />

If CXGPR asserts a powerup request that is not acknowledged, that is,<br />

cpwrupreq[n] = 1 and cpwrupack[n] = 0, writing a 0 to the<br />

CPWRUPREQ register bit[n] does not affect the cpwrupreq[n] output.<br />

Similarly, if CXGPR sends a powerdown request that is not<br />

acknowledged, that is, cpwrupreq[n] is 0 and cpwrupack[n] = 1, writing<br />

a 1 to the CPWRUPREQ register bit[n] does not affect the cpwrupreq[n]<br />

output.<br />

Usage constraints There are no usage constraints.<br />

Configurations<br />

This register is available in all configurations.<br />

Attributes See the register summary in Table 3-1 on page 3-3.<br />

Figure 3-1 on page 3-5 shows the bit assignments.<br />

<strong>ARM</strong> DDI 0480D Copyright © 2011, 2012 <strong>ARM</strong>. All rights reserved. 3-4<br />

ID010213<br />

Non-Confidential

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!