Download User Manual

CnM IP Camera User Manual
Once finished, click the “Save” button.
After all the devices required have been entered, you must click “Submit” button to save all
the devices which have been entered.
5.3.3 Other settings
There are a number of other settings that can be made to the camera, which can be found in
the Other Settings menu option. These include:
Status LED Mode
PTZ center on start
Horizon patrol rounds
Vertical patrol rounds
Manual PTZ Rate
Auto Horizon Rate
Auto Vertical Rate
Selecting “Open LED Indicator” means that the Status Indicator LED on the
camera is enabled and will flash when in use. Selecting “Close LED Indicator”
will turn the LED off.
Selecting “Yes” will center the camera whenever the camera is restarted.
Selecting “No” will leave the camera in the position it was set to.
Allows the number of horizontal patrols to be set. This can be from 1 to 10 or 0
which is infinity and means the camera will continuously patrol horizontally
once set and horizontal patrolling is enabled from the Live View screen.
Allows the number of vertical patrols to be set. This can be from 1 to 10 or 0
which is infinity and means the camera will continuously patrol vertically once
set and vertical patrolling is enabled from the Live View screen.
Controls how fast the camera moves. The available settings range from 10
which is slow, to 0 which is fast.
Controls how fast the camera moves when performing Horizontal patrols. The
available settings range from 10 which is slow, to 0 which is fast.
Controls how fast the camera moves when performing Vertical patrols. The
available settings range from 10 which is slow, to 0 which is fast.
Figure 30
25