Impala SS and Caprice T56 Six Speed install guide - GRAIL

More documents

Recommendations

Info

The next picture show how much it will protrude into the engine bay. 28. Next on the factory pedal assembly out of the F-Body you are going to have to modify the unit by cutting off the gas pedal assembly, in the picture there is a black line next to the main mounting holes, cut here. 16
The next picture shows where to cut the firewall support bracket off on the pedal assembly, it is basically, directly below the main mounting holes as you can see in above picture on the lower left. With the firewall bracket <strong>and</strong> the gas pedal cut off your assembly should look like the next two pictures. 17
Page 1 and 2: Impala SS and Caprice T56 Six Speed
Page 3 and 4: Here we go First you are going to n
Page 5 and 6: 2. The F2B clutch pedal bracket kit
Page 7 and 8: As listed above the original cover
Page 9 and 10: 2. Take measurement from yoke, at t
Page 11 and 12: 15. Take the old transmission dipst
Page 13 and 14: 23. Remove door sill plates that ar
Page 15: acket overlaps the black mounting p
Page 19 and 20: 30. Next remove the two existing br
Page 21 and 22: wiring to mine and put it behind wh
Page 23 and 24: 41. Install retaining clip on rod o
Page 25 and 26: 46. Now to the bump out that you ar
Page 27 and 28: Towards engine Not all manufacturer
Page 29 and 30: marks up. (Note: most times balance
Page 31 and 32: 59. It is my recommendation that yo
Page 33 and 34: 66. Now route in the wiring that yo
Page 35 and 36: 77. Next install shifter onto shift
Page 37 and 38: 87. The last step is to have you PC
Page 39 and 40: Special Thanks A special thanks nee
Page 41 and 42: 2. IT will be like a jigsaw puzzle
Page 43 and 44: Impala SS and Caprice T56 Six Speed
Page 45 and 46: F2B bracket template to use for cut
Page 47 and 48: Impala and Caprice Brake Pedal and
Page 49 and 50: Fbody Clutch and Brake Pedal assemb
Page 51 and 52: Fbody wiring diagram sheet 2 51
Page 53 and 54: If the harness that you have from t
Page 55 and 56: 2. Locate wiring on the Caprice or
Page 57 and 58: Most times the pedal assembly from
Page 59 and 60: 4. Splice wiring to new pigtail ass
Page 61: 8. Attach harness assembly to switc

Impala SS and Caprice T56 Six Speed install guide - GRAIL

Create successful ePaper yourself

Delete template?

Save as template?