Impala SS and Caprice T56 Six Speed install guide - GRAIL
Impala SS and Caprice T56 Six Speed install guide - GRAIL
Impala SS and Caprice T56 Six Speed install guide - GRAIL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. Locate wiring on the <strong>Caprice</strong> or <strong>Impala</strong> that is going to the current<br />
brake pedal switch. I will be a two pin connector with a<br />
brown/white wire going in pin B <strong>and</strong> a brown wire going in pin A<br />
3. Cut connector off <strong>and</strong> discard<br />
4. Splice wiring to new pigtail assembly as follows<br />
‣ Brown/White wire to wire color coming from pin B on new pigtail<br />
assembly<br />
‣ Brown wire to wire color coming from pin A on new pigtail<br />
5. Now the harness that you have from the Fbody donor is from a V6<br />
model. The switches are not identical for the brake <strong>and</strong> the clutch<br />
release, due to space constraints you are going to have to modify<br />
this harness to make it almost identical to the MM6 version<br />
harness as previously discussed.<br />
6. For this Fbody model harness you are going to have to get<br />
another pigtail connector <strong>and</strong> another release switch identical to<br />
the one that you have on the brake pedal.<br />
7. The pigtail you are going to need is part number PT733 or GM<br />
number 12126463 as pictured here.<br />
55
Change language