Impala SS and Caprice T56 Six Speed install guide - GRAIL
Impala SS and Caprice T56 Six Speed install guide - GRAIL
Impala SS and Caprice T56 Six Speed install guide - GRAIL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
If the harness that you have from the donor car is listed on Fbody<br />
harness assemblies diagram as <1&MM6&K34 on the bottom left<br />
of the figure. You are going to do the following.<br />
1. Purchase plug pigtail assembly part number PT159 or GM number<br />
12101888 as pictured here.<br />
2. Locate wiring on the <strong>Caprice</strong> or <strong>Impala</strong> that is going to the current<br />
brake pedal switch. I will be a two pin connector with a<br />
brown/white wire going in pin B <strong>and</strong> a brown wire going in pin A<br />
3. Cut connector off <strong>and</strong> disgard<br />
4. Splice wiring to new pigtail assembly as follows<br />
‣ Brown/White wire to wire color coming from pin B on new pigtail<br />
assembly<br />
‣ Brown wire to wire color coming from pin A on new pigtail<br />
5. The Fbody harness will have two identical connectors that look like<br />
this<br />
53
Change language