Impala SS and Caprice T56 Six Speed install guide - GRAIL
Impala SS and Caprice T56 Six Speed install guide - GRAIL
Impala SS and Caprice T56 Six Speed install guide - GRAIL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The hole is already drilled in this picture. Before you start you are going to want to<br />
trim out the support brace that is kind of blurry in the top portion of the picture, the<br />
red line indicates where the metal use to go to. You have to cut this out to gain<br />
access to the cowl brace. But essentially you take the cowl bracket that the F2B kit<br />
has in it, using the fasteners provided, temporarily <strong>install</strong> the bracket from the kit<br />
<strong>and</strong> mark where the pedal assembly bolt hole is, which should be the threaded hole<br />
on the piece. The hole that you are going to drill is a relief hole for the pedal support<br />
bolt to bolt to. This will take time <strong>and</strong> a bit of cussing. Be patient it will get done.<br />
Note: If you own a 1994 car you are going to find that the light green plastic piece<br />
you see in this picture is the hold down bracket for the ABS module. With this<br />
<strong>install</strong>ation you are going to have to move the ABS brain entirely, I extended the<br />
20
Change language