Burn-in & Test Socket Workshop - BiTS Workshop

More documents

Recommendations

Info

Slide - 17 Summary of Extracted Parameters 23 pH 89 fF 860 pH 151 fF 33 pH 140 fF 23 pH 78 fF 140 fF 89 fF 310 pH 860 pH 133 fF 151 fF 25 fF 33 pH 33 pH VNA Fixture <strong>BiTS</strong> 2002 Contactor Note: load board was not optimized for performance Surrogate
Slide - 18 De-Embedded Insertion and Return Loss of Contactor Return loss Insertion loss Meets specification: < -20 dB, below 10 GHz Meets specification: > -1 dB, below 10 GHz Note: load board is not optimized for performance, standard contactor - not enhanced contactor <strong>BiTS</strong> 2002
Page 1 and 2: Burn-in & Test Socket Workshop IEEE
Page 3 and 4: Burn-in & Test Socket Workshop Tech
Page 5 and 6: Discussion Topics ▼ Modeled Data
Page 7 and 8: Modeled Data ▼ Modeling was done
Page 9 and 10: Modeled Data - S 11 ▼ This is dat
Page 11 and 12: Modeled Data ▼ HFSS Capabilities
Page 13 and 14: Measured Data Surrogate Circuit 10
Page 15 and 16: Measured Data ▼ The 0.5 mm pitch
Page 17 and 18: Comparative Data 0 0.5mm Pitch BGA
Page 19 and 20: Equivalent Circuit Model ▼ Measur
Page 21 and 22: Equivalent Circuit Model 0.5mm Pitc
Page 23 and 24: Equivalent Circuit Model Developmen
Page 25 and 26: Conclusion ▼ For leading edge RF
Page 27 and 28: Slide - 2 Outline • Contactors
Page 29 and 30: Slide - 4 Analysis • Goal Create
Page 31 and 32: Slide - 6 Surrogate Package: Enable
Page 33 and 34: Slide - 8 Probing From the Back Sid
Page 35 and 36: Slide - 10 Methodology • Measure
Page 37 and 38: Slide - 12 Optimized Model: Open Im
Page 39 and 40: Slide - 14 Optimized Model: Short I
Page 41: Slide - 16 Optimized Model: Loop-Th
Page 45 and 46: Slide - 20 Transient Simulation wit
Page 47 and 48: Force Measurement on Sockets and Co
Page 49 and 50: Force Issues in Test and Burn-In En
Page 51 and 52: DUT Thermal Head FMU consists of 3
Page 53 and 54: Experimentation • FMU was used fo
Page 55 and 56: Experimentation cont. • FMU was u
Page 57 and 58: Insertion Life vs. Force cont. •
Page 59 and 60: Looking Forward • Die size Transd
Page 61 and 62: Package/Die Transducer Example Die

Burn-in & Test Socket Workshop - BiTS Workshop

Create successful ePaper yourself

Delete template?

Save as template?