PT-19 ARF Assembly Manual - E-flite
PT-19 ARF Assembly Manual - E-flite
PT-19 ARF Assembly Manual - E-flite
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Cut four strips of card stock that are 3/8-inch<br />
(9mm) wide and 4 inches (100mm) long.<br />
<br />
4. Place the cockpit hatch back into position on the<br />
top of the fuselage.<br />
<br />
6. Slide the propeller adapter onto the motor shaft.<br />
Use the adapter to help align the opening in the<br />
front of the cowl centered with the adapter and<br />
motor shaft.<br />
<br />
3. Use low-tack tape to attach a piece of card stock<br />
that will align with the front edge of the fuselage<br />
and with the cowl mounting plates that are inside<br />
the fuselage.<br />
<br />
5. Slide the cowling onto the front of the fuselage.<br />
Make sure the pieces of card stock are positioned<br />
on the outside of the cowl.<br />
28 E-<strong>flite</strong> <strong>PT</strong>-<strong>19</strong> <strong>ARF</strong> <strong>Assembly</strong> <strong>Manual</strong>
Change language