Model 6100 and 6101 Ambulatory Infusion Pump

More documents

Recommendations

Info

Section 2: Pump Setup and Programming Setup & Programming Continuous Delivery Method The Continuous delivery method provides a continuous rate of delivery in milliliters per hour. The following graph illustrates the Continuous delivery method: Programming Screens for Continuous Delivery The following are the programming screens for the Continuous Delivery method. Descriptions of the screens follow. Continuous Main Screen Reservoir Volume Continuous Rate *** CONTIN 6220X *** STOPPED Press NEXT to advance Reservoir Volume | 100.0 ml Continuous Rate | 0.5 ml/hr 34
Setup & Programming Section 2: Pump Setup and Programming Milliliters Given Air Detector (review) Milliliters Given 0.0 ml since 01/08/05 10:35 Press ENTER to clear Air Detector Required Reservoir Volume Enter the volume of fluid contained in a filled fluid container. The Reservoir Volume value decreases as the pump delivers fluid or you use the priming feature. When you change the fluid container and reset the Reservoir Volume, the value resets to the value entered on this screen. If you do not wish to use the Reservoir Volume feature, select “Not In Use” (located before 1 and after 9999 in the range of values). Continuous Rate Enter the continuous rate of medication delivery in ml/hr. The maximum rate is 350 ml/hr. Rates above 125 ml/hr require a CADD-Prizm High Volume Administration Set. Rates above 250 ml/hr also require an AC Adapter or a Power Pack. NOTE: If you intend to run the pump in Lock Level 1 so the Continuous Rate can be varied, you should enter the maximum allowable rate. After programming, you may then decrease the rate to its starting value. See Programming with Upper Limits, Adjusting Rate in LL1 at the end of this section. Milliliters Given This screen shows the total amount of drug delivered since the time and date indicated, which is the last time this value was cleared. The amount shown is rounded to the nearest 0.1 ml. (If this value reaches 99999.9, it automatically returns to 0 and continues counting.) The Given amount does not include drug delivered with the priming feature. Even if this screen shows zero, you should clear this screen during programming to update the time and date markers. 35
Page 1 and 2: OPERATOR’S MANUAL Model 6100 and
Page 3 and 4: Read this entire Operator’s Manua
Page 5 and 6: • There is no pump alarm to alert
Page 7 and 8: • Do not use the pump near ECG eq
Page 9 and 10: General Description Setup & Program
Page 11 and 12: General Description Section 1: Gene
Page 23 and 24: Setup & Programming Section 2: Pump
Page 43: Setup & Programming Section 2: Pump
Page 67 and 68: Operating the Pump Section 3: Opera
Page 77 and 78: Options Section 4: Options Section
Page 79 and 80: Options Section 4: Options Prime Th
Page 81 and 82: Options Section 4: Options Extended
Page 83 and 84: Options Section 4: Options Change t
Page 85 and 86: Options Section 4: Options Time The
Page 87 and 88: Options Section 4: Options Air Dete
Page 89 and 90: Biomed Toolbox Section 5: Biomed To
Page 95 and 96:
Biomed Toolbox Section 5: Biomed To
Page 97 and 98:
Reference & Troubleshooting Section
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
show all

Model 6100 and 6101 Ambulatory Infusion Pump

Create successful ePaper yourself

Delete template?

Save as template?