Model 6100 and 6101 Ambulatory Infusion Pump

More documents

Recommendations

Info

Setup & Programming Section 2: Pump Setup and Programming Air Detector Status This screen appears only if an Air Detector is attached to the pump. It indicates whether the Air Detector is required, turned on, or turned off. 36
Setup & Programming Section 2: Pump Setup and Programming Continuous Programming Example WARNING: Ensure that the ±6% System Delivery Accuracy specification is taken into account when programming the pump and/or filling the Medication Cassette Reservoir. Failure to do so may result in medication in the reservoir becoming depleted sooner than expected. If the pump is being used to deliver critical or life sustaining medication, the interruption in the delivery of medication could result in patient injury or death. Medication is provided in a 100 ml Medication Cassette Reservoir. The patient should receive medication continuously at 0.5 ml/hr. Before programming: • Stop the pump and change the Lock Level to LL0 as described in Section 1. • Select the Continuous (CONTIN) delivery mode as described in Changing Delivery Modes in Section 4. If the pump is already in the CONTIN delivery mode, you may select it again to clear all programming screens to their default settings. For a full description of each programming screen, see the preceding pages. 1. Begin at the main screen *** CONTIN 6220X *** STOPPED Press NEXT to advance • Make sure the pump is in LL0. • Make sure CONTIN and STOPPED appear on the main screen. • Press „ to begin. 2. Enter the Reservoir Volume Reservoir Volume | 100.0 ml • Press ´ or Î to select the desired volume. (If you do not wish to use the Reservoir Volume feature, scroll down to “Not In Use” located before 1.) • Press ¤ . 37
Page 1 and 2: OPERATOR’S MANUAL Model 6100 and
Page 3 and 4: Read this entire Operator’s Manua
Page 5 and 6: • There is no pump alarm to alert
Page 7 and 8: • Do not use the pump near ECG eq
Page 9 and 10: General Description Setup & Program
Page 11 and 12: General Description Section 1: Gene
Page 23 and 24: Setup & Programming Section 2: Pump
Page 45: Setup & Programming Section 2: Pump
Page 67 and 68: Operating the Pump Section 3: Opera
Page 77 and 78: Options Section 4: Options Section
Page 79 and 80: Options Section 4: Options Prime Th
Page 81 and 82: Options Section 4: Options Extended
Page 83 and 84: Options Section 4: Options Change t
Page 85 and 86: Options Section 4: Options Time The
Page 87 and 88: Options Section 4: Options Air Dete
Page 89 and 90: Biomed Toolbox Section 5: Biomed To
Page 97 and 98:
Reference & Troubleshooting Section
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
show all

Model 6100 and 6101 Ambulatory Infusion Pump

Create successful ePaper yourself

Delete template?

Save as template?