OPTIMA System - Isover

OPTIMA System – Advantage after advantage
Renovating with the OPTIMA System means rapid installation of an air tight insulation layer including a finished wall. Waiting for the
lengthy drying times of individual components is avoided. The OPTIMA System allows the integration of cables and ducts without compromising
the insulation. All elements of the OPTIMA System are easy to transport, store and distribute on site. With ISOVER glass wool
products, up to 100 mm thick, a significant improvement of the thermal insulation and a reduction of energy costs can be
achieved. Furthermore, this solution improves sound properties of interior rooms and protects against noise from outside the building.
OPTIMA Metal frame – light, solid, but elastic
• Avoids thermal bridges, as the insulation layer is continuous
• Easy and practical installation with no waste
• Precise installation to the nearest millimetre
• Perfectly matched components
ISOVER insulation – highest insulation performance
• Products with the lowest thermal conductivity λd = 0.032 W/(mK), or λd = 0.035 W/(mK) save space
and increase thermal and sound insulation performance
• Compressed products save space and time, both for transport and distribution on site
• Excellent quality and safety – non-combustible and CE mark certified
VARIO – air tightness and protection against moisture
• Breathable and moisture regulatory
• Excellent assurance due to a variable sd-value of 0.2–5.0 m
• Ease of work: printed guidelines for easy accurate cutting, and fleece surface for better adhesion to substrate
• Product is perfect for any application
• Patented system based on 10 years experience and more than 15 million m2 of protected area installed
Facing with plaster board – suitable for every design
• Quick assembly
• Smooth and level surface
• Suitable for every room height or size
19