OPTIMA System - Isover
OPTIMA System - Isover
OPTIMA System - Isover
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>OPTIMA</strong> – <strong>System</strong> components<br />
4<br />
3<br />
2<br />
6<br />
5<br />
8<br />
1<br />
1<br />
A dry, high performance system<br />
I. Metal frame<br />
1. <strong>OPTIMA</strong> Bottom and Ceiling Stud<br />
2. <strong>OPTIMA</strong> 240 Stud<br />
3. <strong>OPTIMA</strong> 30 or 50 Stud<br />
4. <strong>OPTIMA</strong>2 Support (new) or<br />
<strong>OPTIMA</strong>2 Support Reno (renovation)<br />
II. Insulation<br />
5. ISOVER glass wool with<br />
�d = 0.035 W/mK or 0.032 W/mK<br />
What you would need to install the <strong>OPTIMA</strong> <strong>System</strong> on five metres of wall – an example:<br />
<strong>OPTIMA</strong> Floor and Ceiling Stud 10 m (5 studs)<br />
<strong>OPTIMA</strong> 240 Stud 24 m (10 studs)<br />
<strong>OPTIMA</strong> 30 Stud 10 studs<br />
VARIO KB1 13 m (1 roll)<br />
VARIO DB 10 m (1 roll)<br />
<strong>OPTIMA</strong>2 Support 10 pieces (1 bucket)<br />
VARIO KM/KM Duplex UV 16.8 m2 (1 roll)<br />
7<br />
This table gives an indication of the materials needed based on a maximum<br />
wall height of 2.6 m and spacing of vertical studs at 600 mm centres.<br />
6<br />
9<br />
III. Vapour retarder and air tightness layer<br />
6. VARIO DB sealing tape<br />
7. VARIO KM or VARIO KM Duplex UV air tightness layer<br />
8. VARIO KB1 one-sided adhesive tape<br />
IV. Facing<br />
9. Plaster board or other interior facings<br />
(e.g. wooden panels)<br />
5
Change language