OPTIMA System - Isover
OPTIMA System - Isover
OPTIMA System - Isover
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
High energy costs but a low comfort level – a growing problem.<br />
Most of the houses in the European Union are more than 30 years old and do not offer the levels of<br />
comfort we expect today. We speak of "thermal comfort" when it is neither too cold nor too warm – in<br />
summer and winter.<br />
Perception of a “comfortable temperature” results from a small difference between interior ambient air<br />
temperature and that of the interior surfaces of the outer walls and windows. In these conditions, one<br />
can enjoy a homogeneous air temperature throughout the whole house or flat and the absence of<br />
annoying drafts.<br />
Older houses were built at a time when the building mentality was very different from that of today,<br />
and when there were no efficient thermal insulation materials readily available.<br />
Although a lot of energy is used to heat old houses or flats, they are overheated in summer and yet<br />
rarely become warm in winter. Despite occupants having to pay high energy bills, for cooling in summer<br />
and heating in winter, thermal comfort is nevertheless not achieved very often.<br />
In view of rapidly increasing energy prices, living in older houses may well become a very expensive<br />
"pleasure", notwithstanding the high consumption of natural resources and the emissions that burden<br />
our environment.<br />
ISOVER dry wall solution – The <strong>OPTIMA</strong> <strong>System</strong><br />
Everyone looking for an efficient, yet easy and quick solution for renovating their own four walls needs<br />
look no further than the <strong>OPTIMA</strong> <strong>System</strong> from ISOVER.<br />
<strong>OPTIMA</strong> is a modern system for easy and rapid renovation or improvement of thermal and sound insulation.<br />
The system solution, with its superbly matched components make assembly simple and easy.<br />
When it is not possible to install facade or wall-cavity insulation, whether for technical, economic or<br />
social reasons (shared ownership), then insulating inside the building is strongly recommended.<br />
The <strong>OPTIMA</strong> <strong>System</strong> offers ideal solutions for the renovation and insulation of external walls from the<br />
inside.<br />
3