OPTIMA System - Isover
OPTIMA System - Isover
OPTIMA System - Isover
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Floor and Ceiling Studs (Item 1 in the illustration on Page 5)<br />
<strong>OPTIMA</strong><br />
Ceiling Stud<br />
<strong>OPTIMA</strong><br />
Floor Stud<br />
<strong>OPTIMA</strong> Floor and Ceiling Studs (Pictures 2 & 3) allow the<br />
embedding and the adjusting of the vertical stud positioning.<br />
Facing Support (Item 2 & 3 in the illustration on Page 5)<br />
For the facing support, the <strong>OPTIMA</strong> 240 Stud (a 2.40 m metal section) can be jointed and adjusted to<br />
match the length as required. <strong>OPTIMA</strong> 30 and 50 Studs can be used to join or link <strong>OPTIMA</strong> 240 Studs<br />
(Picture 5).<br />
<strong>OPTIMA</strong><br />
30 a 50 Stud<br />
<strong>OPTIMA</strong><br />
240 Stud<br />
1<br />
4<br />
In short – The Advantages of <strong>OPTIMA</strong> Studs.<br />
Joints between <strong>OPTIMA</strong> 240 Stud and <strong>OPTIMA</strong> 30 or 50 Studs must overlap at least 10 cm. With an<br />
OTPIMA 240 Stud and an intermediate support fixed at 1.35 m height, the maximum heights to<br />
ceiling are 2.60 m and 2.80 m by adding an <strong>OPTIMA</strong> 30 Stud or <strong>OPTIMA</strong> 50 Stud respectively.<br />
• The clip fastener ensures studs are firmly secured in position and will not shake loose<br />
• Time saving during installation<br />
• Adjustment to the nearest millimetre<br />
All advantages of the <strong>OPTIMA</strong> <strong>System</strong> at a glance on Page 19<br />
2<br />
3<br />
5<br />
7