Bose 3-2-1 GSX User Guide Manual - Cinema System Manual
Bose 3-2-1 GSX User Guide Manual - Cinema System Manual
Bose 3-2-1 GSX User Guide Manual - Cinema System Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SETUP<br />
To get digital audio from the component<br />
For a component that is already connected to the<br />
media center, you can make a digital audio connection<br />
too.<br />
For this higher quality audio, you need a digital audio<br />
cable that works with your component. Such cables are<br />
available at most electronics stores.<br />
1. Identify the digital connector on your component<br />
as either an Optical or Coaxial connector.<br />
2. Be sure to use the right cable for this connector.<br />
Note: If your component has an Optical and a Coaxial<br />
connector, use either one but not both.<br />
20<br />
Coaxial<br />
Optical<br />
Optical OR Coaxial<br />
Svenska Nederlands Français Italiano Deutsch Español English<br />
3. Connect one end of your digital cable to the digital<br />
AUDIO OUT connector on your component.<br />
Be sure to keep the red and white audio cable<br />
connected. This allows you to hear the audio if the<br />
program audio is not digital or the digital signal is<br />
interrupted.<br />
4. Locate the appropriate digital AUDIO IN connector,<br />
labeled D, on the system media center.<br />
You can make:<br />
up to 3 coaxial connections<br />
up to 2 coaxial and one optical connection<br />
Note: The media center Optical connector is factory<br />
set to work with a cable or satellite box. If your Optical<br />
component is neither of those, you need to select your<br />
component in an on-screen <strong>System</strong> menu. See<br />
“Getting digital audio from a source” on page 45.