Bose 3-2-1 GSX User Guide Manual - Cinema System Manual
Bose 3-2-1 GSX User Guide Manual - Cinema System Manual
Bose 3-2-1 GSX User Guide Manual - Cinema System Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SETUP<br />
Controlling another component<br />
With your CBL SAT, VCR, or other component turned<br />
on, follow these steps.<br />
1. In the Device Codes list, find the codes for the type<br />
and brand of your component.<br />
2. On the 3 2 1 ® remote, press and hold the<br />
button for this component for several<br />
seconds.<br />
Wait until the red light at the top of the<br />
remote turns on.<br />
3. Enter the device code for your component.<br />
The light turns off briefly as you press each key.<br />
4. Make sure the light turns off completely after all<br />
digits are entered.<br />
If the light blinks instead of turning off, the code is<br />
invalid. Return to step 2 and try a different code for<br />
your component.<br />
32<br />
Svenska Nederlands Français Italiano Deutsch Español English<br />
or<br />
AUX<br />
5. Point the 3 2 1 remote at your<br />
component and press the On/<br />
Off button for this source.<br />
Use the 3 2 1 remote to turn<br />
the component on again and to skip<br />
forward by pressing channel up or down.<br />
If it performs both operations, this code is<br />
correct. Write the code numbers below:<br />
If this code does not work, repeat steps 2-5<br />
using a different code for your component.<br />
AUX