Bose 3-2-1 GSX User Guide Manual - Cinema System Manual

ADJUSTMENTS TO THE PERFORMANCE
56
Mono Decoding
Available only if Audio
Processing is set to
Adjustable in the
Audio System menu.
(Not available
on CD or FM·AM.)
Audio 1 + 1
Features
Available only if a dual
mono signal is detected
on a video CD or digital
broadcast.
Video Resolution
Adjustable only for a
TV connected by HDMI
AND only if the DVD
Image setting in the
System menu is
Modified.
Default Setting
(Options)
Off
(On)
1
(2, Both)
_____* Default
(1080p, 1080i, 720p,
480/576p, 480/576i)
Svenska Nederlands Français Italiano Deutsch Español English
Effect
When one-channel (mono) is the audio input, this mono signal is sent to both
speakers.
Processes the signal from one-channel (mono) audio input (if it is detected)
for right and left channel output.
Allows you to decode and play bilingual audio from a VCD or single-channel
digital broadcast.
When the digital audio content is on two channels, each channel carries a
unique mono soundtrack (1 + 1).
Changing this setting allows you to hear the audio on mono channel 2, or
both mono channels at the same time.
Your 3•2 1 ® system sets its DVD video resolution to match the default that is
communicated to it by the TV. You can experiment with other settings to see
which one provides the best picture.
HDTVs can accept different resolutions as input, and in some cases the highest
number does not result in the best picture.
Important note: When you change resolution, your TV screen takes several
seconds to make the transition. Allow for this adjustment before pressing
other buttons.