CUTTING TOOLS

More documents

Recommendations

Info

12 626 Arbor 1 CUTTING TOOLS for reamers 12 628…, with forcing nut and driving ring, mounting taper 1:30, holder and driving ring hardened, Morse taper. Size 12 626… Ø Overall MK length mm mm Range of use DIN 219 Range of use DIN 222 Range of use DIN 8054 1 005 10.0 220 2 20 - 24 - - 2 010 13.0 250 3 25 - 30 25 - 35 30 - 35 3 015 16.0 261 3 31 - 35 36 - 45 36 - 45 4 020 19.0 298 4 36 - 42 46 - 53 46 - 53 5 025 22.0 312 4 43 - 50 54 - 63 54 - 63 12 626… 12 628 Shell reamers HSS/E, right-hand cutting, with tapered hole 1:30, spiral fluted Design features The shell reamers have a short 45° bevel lead. The tenon is made to DIN 138. Spiral fluted shell reamers must be used for holes with interrupted cut (e.g. transverse holes, flutes). Areas of use For iron, non-ferrous metals and plastics. 12 628… Ø 12 628… mm Cutting edge length mm Overall length mm Hole Ø mm Arbor 20.0 020 40 50 10 1 21.0 021 40 50 10 1 22.0 022 40 50 10 1 23.0 023 40 50 10 1 24.0 024 40 50 10 1 25.0 025 32 45 13 2 26.0 026 32 45 13 2 27.0 027 32 45 13 2 28.0 028 32 45 13 2 29.0 029 32 45 13 2 30.0 030 32 45 13 2 31.0 031 36 50 16 3 32.0 032 36 50 16 3 33.0 033 36 50 16 3 34.0 034 36 50 16 3 35.0 035 36 50 16 3 36.0 036 40 56 19 4 37.0 037 40 56 19 4 38.0 038 40 56 19 4 39.0 039 40 56 19 4 40.0 040 40 56 19 4 41.0 041 40 56 19 4 42.0 042 40 56 19 4 43.0 043 45 63 22 5 44.0 044 45 63 22 5 45.0 045 45 63 22 5 46.0 046 45 63 22 5 47.0 047 45 63 22 5 48.0 048 45 63 22 5 49.0 049 45 63 22 5 50.0 050 45 63 22 5 Reamers P 10 - 18 0.35 - 0.6 M 4 - 10 0.25 - 0.4 K 8 - 14 0.35 - 0.6 NE 14 - 20 0.35 - 0.6 H - - S - - 132 ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com “TOOLS”
Overview of types Hand taps Page Catalogue DIN Flutes Material Thread type Size Brand Number from - to 138 13 002 352 straight HSS M M1 - M48 139 13 003 352 straight HSS M M1 - M48 140 13 004 352 straight HSS-E M M2 - M16 CUTTING TOOLS 1 140 13 006 352 straight HSS-E M M3 - M12 141 13 007 352 straight HSS-E M M3 - M20 141 13 009 352 straight HSS M M3 - M20 142 13 011 2181 straight HSS MF M2x0.25 - M50-1.5 142 13 013 2181 straight HSS MF M2x0.25 - M50-1.5 143 13 015 2184-2 straight HSS UNC 1/4” - 1” 143 13 017 2184-2 straight HSS UNF 1/4” - 1” 144 13 019 2184-2 straight HSS BSW 1/8” - 3/4” 144 13 021 5157 straight HSS G G1/8 - G1 145 13 023 5157 straight HSS G G1/16 - G2 Overview of types Machine taps / machine fluteless taps Page Catalogue DIN Flutes Chamfer Material Thread Size Brand Number lead type from - to 145 13 040 352 straight B HSS-E M M3 - M12 146 13 042 352 R 15 C HSS-E M M3 - M12 146 13 043 352 R 40 C HSS-E M M3 - M12 148 13 050 371 straight C HSS-E M M3 - M10 148 13 051 371 straight C HSS-E M M1 - M10 149 13 052 376 straight C HSS-E M M3 - M36 149 13 054 376 straight C HSS-E M M2 - M36 150 13 056 371 straight B HSS-E M M3 - M10 150 13 057 371 straight B HSS-E M M3 - M20 150 13 060 371/376 straight C HSS-E M M3 - M10 151 13 058 371/376 straight B HSS-E M M3 - M20 152 13 061 376 straight B HSS-E M M3 - M20 152 13 062 376 straight B HSS-E M M3 - M42 Taps and dies Continued on next page ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex “TOOLS” Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com 133
Page 1 and 2:
1.0 Drilling and centring tools Pag
Page 3 and 4:
! Application data calculation Term
Page 5 and 6:
Steel codes Material No. DIN Materi
Page 7 and 8:
Overview of types Twist drill bits
Page 9 and 10:
Overview of types Step drill bits /
Page 11 and 12:
10 010 Twist drill bits rolled, ste
Page 13 and 14:
Ø d1 10 015... 10 017... l1 l2 Ø
Page 15 and 16:
10 031 Twist drill bit sets in meta
Page 17 and 18:
10 043 Twist drill bits for long to
Page 19 and 20:
10 054 Deep hole twist drill bits v
Page 21 and 22:
10 064 Twist drill bits for high cu
Page 23 and 24:
10 068 Twist drill bits for drillin
Page 25 and 26:
10 091 Twist drill bit boxes, empty
Page 27 and 28:
10 105 Twist drills, extra short 10
Page 29 and 30:
10 110 Twist drills, extra short Hi
Page 31 and 32:
10 142 Car body drill bit Robust an
Page 33 and 34:
10 152 Twist drill bit, long for dr
Page 35 and 36:
10 156 Twist drill bit, long high c
Page 37 and 38:
10 162 Twist drill bit, long Twist
Page 39 and 40:
10 219 Deep hole twist drill bit, e
Page 41 and 42:
10 315 Twist drill bits for long to
Page 43 and 44:
10 325 Twist drill bits Twist drill
Page 45 and 46:
10 386 Deep hole twist drill bits v
Page 47 and 48:
10 424 HSS subland drill bits Nitri
Page 49 and 50:
10 431 Core drill bits with QuickIN
Page 51 and 52:
10 452 Centre drill bits 10 452…
Page 53 and 54:
10 474 NC spot drill bits with spir
Page 55 and 56:
10 485 NC spot drill bits Type as 1
Page 57 and 58:
10 513 Spotweld remover bit Prefera
Page 59 and 60:
10 522 Step drill bits With steady
Page 61 and 62:
Overview of types VHM twist-drill b
Page 63 and 64:
10 550 Solid carbide twist drill bi
Page 65 and 66:
10 553 Solid carbide metal twist dr
Page 67 and 68:
10 558 VHM thread drilling tool the
Page 69 and 70: Guideline values for ALPHA4Plus Mic
Page 71 and 72: Ø d1 10 564... 10 565... 10 566...
Page 73 and 74: Ø d1 10 569… d2 l1 l2 l4 mm mm m
Page 75 and 76: 10 573 Solid carbide cooling duct t
Page 77 and 78: Ø d1 10 581… d2 l1 l2 l4 mm mm m
Page 83 and 84: 10 603 Solid carbide cooling duct d
Page 85 and 86: 10 602 Sintered carbide twist drill
Page 87 and 88: 10 660 Sintered carbide SDS hammer
Page 89 and 90: 10 682 Tool holder shanks without c
Page 91 and 92: 11 101 Countersink bit, single poin
Page 93 and 94: 11 118 Countersink bit sets Content
Page 95 and 96: 11 160 Countersink bit axially and
Page 97 and 98: 11 712 Counterbore bit with paralle
Page 99 and 100: 11 732 Counterbore bit with paralle
Page 101 and 102: 11 818 Toolholder size 0 Shank sock
Page 103 and 104: 11 838 Insert drill bit HSS CO Size
Page 105 and 106: 11 870 Toolholder Size 2 with inter
Page 107 and 108: 11 880 Countersink bit for indexabl
Page 109 and 110: 12 242 Quick release, adjustable ha
Page 111 and 112: 12 306 Tapered roughing reamers 45
Page 113 and 114: 12 512 Machine reamers Left-hand sp
Page 115 and 116: 12 522 NC machine reamers right-han
Page 117 and 118: 12 533 Machine roughing reamers 45
Page 119: 12 622 Sintered carbide machine rea
Page 123 and 124: Page Catalogue DIN Flutes Chamfer M
Page 125 and 126: ! Explanation of the cutting parame
Page 127 and 128: 13 003 Hand taps Special features:
Page 129 and 130: 13 007 Hand taps Special features:
Page 131 and 132: 13 015 Hand tap set 2B Special feat
Page 133 and 134: 13 023 Hand tap set Special feature
Page 135 and 136: 13 044 Combined drill bit and taps
Page 137 and 138: 13 052 Machine taps Application: Ea
Page 139 and 140: 13 058 Machine taps, left cutting A
Page 141 and 142: 13 066 Machine taps Application: Ea
Page 143 and 144: 13 076 Machine taps Application: sh
Page 145 and 146: 13 079 Fluteless tap Application: M
Page 147 and 148: 13 085 High-performance fluteless t
Page 149 and 150: 13 089 Machine taps Type: Applicati
Page 151 and 152: 13 094 Machine taps Type: Applicati
Page 153 and 154: 13 117 Machine taps Type: Right-han
Page 163 and 164: 13 174 Machine taps Application: Hi
Page 169 and 170: d1 x pitch mm 13 371... Wodex 13 37
Page 171 and 172:
13 376 Machine taps Type: Right-han
Page 173 and 174:
13 410 Machine taps 2B Type: with s
Page 175 and 176:
13 421 Machine taps 2B Type: Right-
Page 177 and 178:
13 560 Machine taps Type: with spir
Page 179 and 180:
13 574 Machine taps Type: Right-han
Page 181 and 182:
Solid carbide thread milling cutter
Page 183 and 184:
13 693 Thread milling drill bit for
Page 185 and 186:
13 695 Indexable insert for 60° th
Page 187 and 188:
13 705 Dies Thread type: EN 22568 T
Page 189 and 190:
13 752 Dies Thread type: EN 22568 T
Page 191 and 192:
13 842 Dies Type: pre-slit Special
Page 193 and 194:
13 920 Hand tap sets complete in pa
Page 195 and 196:
13 973 "Tap crown" tap remover for
Page 197 and 198:
13 993 Cu electrodes for HSS, steel
Page 199 and 200:
14 003 Metal cutting circular saw b
Page 201 and 202:
14 058 Metal cutting circular saw b
Page 203 and 204:
Overview of uses of HSS milling cut
Page 205 and 206:
15 009 HSS-E narrow side & face slo
Page 207 and 208:
15 110 Shell end mills with longitu
Page 209 and 210:
15 206 Long slot drill cutters Suit
Page 211 and 212:
15 215 Slot drill cutters Suitable
Page 213 and 214:
15 224 End mill cutter, multi flute
Page 215 and 216:
15 236 Ball nosed slot drills Suita
Page 217 and 218:
15 248 Roughing cutters Suitable fo
Page 219 and 220:
15 260 PM Wodex-Eco milling cutters
Page 221 and 222:
15 499 HSS-E corner rounding cutter
Page 223 and 224:
verview of uses of VHM milling cutt
Page 225 and 226:
Page DIN Shank Coating Type rder Nu
Page 227 and 228:
15 782 1-flute cutters special geom
Page 229 and 230:
15 803 “XL” long slot drill cut
Page 231 and 232:
15 813 Mini-shank/disposal milling
Page 233 and 234:
15 817 “Uni-alu” slot drill cut
Page 235 and 236:
15 824 “Uni R” long slot drill
Page 237 and 238:
15 831 “XL-B” ball nosed copy m
Page 239 and 240:
15 856 “INOX” roughing cutters
Page 241 and 242:
15 890 Wodex “UNI” ECO cutters
Page 243 and 244:
15 868 “50 HRC XXL” multi-tooth
Page 245 and 246:
15 900 HSC cutters with “HRC 55-L
Page 247 and 248:
15 910 “HRC 55” HSC torus cutte
Page 249 and 250:
16 501 Straight lathe tools DIN 497
Page 251 and 252:
16 536 Wide face square nose turnin
Page 253 and 254:
16 576 Offset side turning tools DI
Page 255 and 256:
16 606 60° external thread turning
Page 257 and 258:
16 650 HSS-Co parting turning tools
Page 259 and 260:
! Properties of the knurling method
Page 261 and 262:
16 847 Knurling milling cutter tool
Page 263 and 264:
16 857 HSS thumbwheels (DIN403) for
Page 265 and 266:
Turning + parting overview IH Page
Page 267 and 268:
19 207 PCBN 75° toolholder for ext
Page 269 and 270:
19 352 CNMG - DM tip medium machini
Page 271 and 272:
19 662 TCBN 75° toolholder Toolhol
Page 273 and 274:
19 367 DNMG - WM tip medium machini
Page 275 and 276:
19 670 TDJN 93° toolholder 19 670
Page 277 and 278:
19 217 PRDC toolholder for external
Page 279 and 280:
19 674 TSRN 75° toolholder Toolhol
Page 281 and 282:
19 405 TNMG - EX tip medium machini
Page 283 and 284:
19 417 WNMG - DM tip medium machini
Page 285 and 286:
f 19 275 SCLC 95° boring bars for
Page 287 and 288:
19 237 Boring bar set A-SDQC-107°
Page 289 and 290:
19 280 SDUC 93 boring bars for inte
Page 291 and 292:
19 245 SSDC 45 toolholder For exter
Page 293 and 294:
19 257 SVVC 72° 30` toolholder For
Page 295 and 296:
Accessories for 19 256…, 19 259
Page 297 and 298:
“Safety Products” catalogue Ey
Page 299 and 300:
f f f 1 1 19 300 “Eco-Cut” for
Page 301 and 302:
19 486 Tips for parting, radial S =
Page 303 and 304:
19 312 Solid parting off holder wit
Page 305 and 306:
19 318 Parting off holder for large
Page 307 and 308:
19 318 Toolholder for face grooving
Page 309 and 310:
19 483 MONOBLOCK face parting holde
Page 311 and 312:
19 493 Parting turning tips with 2
Page 313 and 314:
19 327 Precision grooving holder Ty
Page 315 and 316:
19 470 SPGN / SPUN tip for C clampi
Page 317 and 318:
19 500 Threading tips for external
Page 319 and 320:
19 511 Threading tips for Whitworth
Page 321 and 322:
ISO Code - Boring bars 1 2 S 25 3 T
Page 323 and 324:
Description of hard metal grades WO
Page 325 and 326:
ISO Nomenclature - Turning (5) Cutt
Page 327 and 328:
19 703 Angle milling cutters with i
Page 329 and 330:
19 821 APFT tip for 90° machining
Page 331 and 332:
19 736 Shell end mill cutters with
Page 333 and 334:
19 715 45° face milling cutter for
Page 335 and 336:
19 801 OFER tip Type 19 801… 19 8
Page 337 and 338:
19 719 45° face milling cutter wit
Page 339 and 340:
19 720 T-slotting milling cutter fo
Page 341 and 342:
19 721 Chamfering milling cutter an
Page 343 and 344:
19 743 180° bore enlarger/ counter
Page 345 and 346:
19 740 Side and face slotting cutte
Page 347 and 348:
19 788 90° angle milling cutters f
Page 349 and 350:
19 793 Posidrill Plus borer for TIP
Page 351 and 352:
19 798 Ball end mill for TIP XPNT
Page 353 and 354:
19 804 Milling cutter with modular
Page 355 and 356:
19 807 Plunge milling cutters for T
Page 357 and 358:
19 817 Hollow shaft taper HSK A DIN
show all

CUTTING TOOLS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?