CUTTING TOOLS

1
CUTTING TOOLS
19 368 DNMM - DR tip
roughing, single-sided
ap = 2.0 - 8.0 mm
Type 19 368… 19 368… 19 368…
WOG 2315 WOG 2425 WOG 2435
DNMM 150608 - DR 203 204 -
DNMM 150612 - DR - 214 216
P 80 - 240 70 - 200 55 - 240 0.35 - 0.8
M - - 70 - 100 0.35 - 0.8
K 100 - 200 - - 0.35 - 0.8
NE - - - -
H - - - -
S
19 653 DNMG-CE tip
• tough ceramic mix with high wear resistance
• Finishing to roughing of hardened steel and hard
materials up to 62 HRC
• can be used for lost (incomplete) cut
Type 19 653…
WOK 2310
DNMG 150608 CE 103
P - -
M - -
K - -
NE - -
H 80 - 200 0.1 - 0.2
S
19 375 DNMG-3J tip
ap = 1.0 - 2.5 mm
19 376 DNMG-SI tip
with SI chip breaker
Type 19 375… 19 375…
NL40
SP3036
DNMG150604E-3J 016 015
DNMG150608E-3J 026 025
P 40 - 360 - 60 - 430 0.14 - 0.4
M 50 - 245 - 75 - 290 0.14 - 0.4
K - - - -
NE - - - -
H - - - -
S
Type 19 376… 19 376…
right-hand left-hand
WOG 4230 WOG 4230
DNMG 150604ER/L-SI 003 005
DNMG 150608ER/L-SI 007 009
P 90 - 280 90 - 280 0.05 - 0.3
M 80 - 180 80 - 180 0.05 - 0.3
K - - -
NE - - -
H - - -
S - - -
19 660 DNGA ceramic tip
• tough ceramic mix with high wear resistance
• Finishing to roughing of hardened steel and hard materials
up to 62 HRC
• can be used for lost (incomplete) cut
19 652 DNMA CBN tip
• for finishing and roughing hardened steels
(from 45 HRC)
• can be used for lost (incomplete) cut
“Turning” / “Parting” / “Milling”
Type 19 660…
WOK 2310
DNGA 150604 123
DNGA 150608 143
P - -
M - -
K 300 - 800 0.1 - 0.5
NE - -
H 50 - 200 0.1 - 0.25
S
Type 19 652… 19 652…
SKL 2.5 mm
SKL 4 mm
DNMA 150604 003 001
DNMA 150608 004 002
P - - - -
M - - - -
K - - - -
NE - - - -
H 80 - 200 - 80 - 200 0.1 - 0.2
S
286
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
“TOOLS”