CUTTING TOOLS

19 493 Parting turning tips with 2 cutting edges
for parting off and grooving
Type 19 493… 19 493… s
WOU 3010 WOV 3010 mm
CTD-3 ALU 001 101 3
CTD-4 ALU 003 103 4
CTD-5 ALU 005 105 5
CTR-3/6° ALU 007 107 3
CTR-4/6° ALU 009 109 4
CTR-5/6° ALU 011 111 5
CTL-3/6° ALU 013 113 3
CTL-4/6° ALU 015 115 4
CTL-5/6° ALU 017 117 5
19 493…
CUTTING TOOLS
1
S = parting width +0.15
CTDS-RAZOREDGE
Ground cutting edges • Precision finishing
VTNS-V3
Parting turning • Finishing
MTNS-MAIKÄFER (precision sintered)
Parting turning • Roughing
of steel, cast iron and high alloy
materials
RTNX-VOLLRADIUS (“X” precision sintered)
Parting turning • Roughing
of steel, cast iron and high alloy Materials
RTNG-VOLLRADIUS (“G” precision ground)
Parting turning • Finishing • Ground cutting edges
of non-ferrous metals, difficult to cut
materials
BTNN, BTNR, BTNL - PRO STECHEN
New developed parting tip with multi-dimensional chip
breaker. Suitable for multi-purpose use, for parting off.
CTD-IT-CLASSIC
IT geometry is ground with negative chamfer and is
particularly suitable for: alloyed
steels, stainless steels, lost
(incomplete) cuts, for parting off.
CTD-ALU
ALU geometry is sharp and positively ground and is
particularly suitable for: Non-ferrous metals, pipes, thinwalled
parts, weak, unstable parts, free-cutting steels.
STNS-SUPER-NOVA
Sharp cutting edge with chip breaker. Preferably stainless
steels.
HTNS-HEUBERG
Sharp cutting edge with positive rake angle. Special use
as automatic machine parting tip.
ITNS
Stabilised cutting edge with chip breaker. Preferably
alloyed steels.
“Turning” / “Parting” / “Milling”
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
“TOOLS”
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
323