CUTTING TOOLS

16 847 Knurling milling cutter tool
For making the knurl patterns RGE30° and RGE45° according to
DIN 82, thumbwheels: RGE30° - 2 No. shape AA, RGE45° -
1 No. BL15° / 1 No. BR15°. Supplied without knurls.
Special surface hardening for increased wear resistance.
Sintered carbide arbor bearing sleeves = higher speeds = faster
machining = improved tool life
Longitudinal knurling, knurl milling cutting (machining with chip removal)
Pitch is integrated in the tool holder.
Synchronous adjustment of the knurl edges to the workpiece diameter
via central adjusting screw.
For thumbwheel
16 847...
Shank B x H x L
mm
Working range*
mm
Type
16 847…
CUTTING TOOLS
1
10 x 3 x 6
10 x 3 x 6
10 x 3 x 6
10 x 3 x 6
010
011
012
013
10 x 10 x 107
10 x 10 x 107
12 x 12 x 107
12 x 12 x 107
2 - 15
2 - 15
2 - 15
2 - 15
L
R
L
R
16 848 Knurling milling cutter tool
For making the knurl pattern RAA (thumbwheels BR30°, right-hand
type, or BL30°, left-hand type)
Fine adjustment for axially parallel knurling by means of adjustable
knurling head. Adjustment of the clearance angle via the grub screw
on the shaft. Supplied without knurls.
Special surface hardening for increased wear resistance.
Sintered carbide running pins = higher speeds = faster machining =
improved tool life.
Prod. No. 16 848 010 - 16 848 017 for long automatic lathes
Prod. No. 16 848 020 - 16 848 026 for short automatic lathes
(CNC + conventional)
16 848…
Modular layout - knurl milling cutting head for right-hand and left-hand
version is interchangeable. Pitch is integrated in the tool holder. Knurl
milling cutting (machining with chip removal), longitudinal knurling
For thumbwheel
16 848...
Shank B x H x L
mm
Working range
mm
Type
16 848…
10 x 3 x 6
10 x 3 x 6
15 x 4 x 8
15 x 4 x 8
15 x 4 x 8
15 x 4 x 8
25 x 6 x 8
25 x 6 x 8
25 x 6 x 8
25 x 6 x 8
010
011
012
013
016
017
020
021
025
026
10 x 10 x 98
10 x 10 x 98
12 x 12 x 99
12 x 12 x 99
16 x 16 x 99
16 x 16 x 99
20 x 20 x 129
20 x 20 x 129
25 x 25 x 129
25 x 25 x 129
1.5 - 15
1.5 - 15
3 - 50
3 - 50
3 - 50
3 - 50
10 - 300
10 - 300
10 - 300
10 - 300
L
R
L
R
R
L
R
L
R
L
16 849 Knurling milling cutter tool
For knurling by chip removal - RGE30°, RGE45° according to DIN 82.
RGE30° - 2 No. knurl edge shape AA RGE45° - 1 No. knurl edge BL15°
and BR15°.
With setting scale for the workpiece Ø, adjustable via an adjusting screw
and synchronous gearing, fine adjustment for positioning of the knurl
milling cutting head, with modular layout: This knurl milling cutting tool
can be also universally used as right and left-hand version - reset by simply
turning the knurl milling cutting head.
Special surface hardening for increased wear resistance.
Sintered carbide arbor bearing sleeves = higher speeds = faster machining
= improved tool life.
Supplied without knurls.
Prod. No. 16 849 016 and 16 849 020
Use on conventionally controlled lathes, pitch of the tool must be adjusted
Prod. No. 16 849 116 to 16 849 125
Additional use on CNC controlled lathes too. Pitch is integrated in the tool
holder.
For knurled edge
mm
15 x 4 x 8
25 x 6 x 8
15 x 4 x 8
25 x 6 x 8
25 x 6 x 8
16 849...
016
020
116
120
125
Shank B x H
mm
16 x 16
20 x 20
20 x 16
20 x 20
25 x 25
Working range
mm
3 - 50
10 - 250
10 - 250
10 - 250
10 - 250
16 849…
Lathe and knurling tools
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
“TOOLS”
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
273