FX25 Operator's Manual - Ditch Witch
FX25 Operator's Manual - Ditch Witch
FX25 Operator's Manual - Ditch Witch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>FX25</strong> Operator’s <strong>Manual</strong> Service - 63<br />
Service Precautions<br />
Working Under Raised Tank Door<br />
Crushing weight could cause death or serious injury. Use proper<br />
procedures and equipment or stay away.<br />
To help avoid injury: Use tools (provided with unit) if unit must be serviced with tank<br />
door up.<br />
1. Locate door lock tools in tool storage area and bring<br />
to rear of tank.<br />
2. Raise tank door completely.<br />
3. Pin door lock tools into place as shown.<br />
4. Lower tank lid until load is supported by door lock<br />
tools.<br />
Welding Precaution<br />
j32om008h.eps<br />
NOTICE: Welding can damage electronics.<br />
• Disconnect battery to prevent damage to battery. Do not turn off battery disconnect switch with<br />
engine running, or alternator and other electronic devices may be damaged.<br />
• Connect welder ground clamp close to welding point and make sure no electronic components are<br />
in the ground path.<br />
• Always disconnect the Engine Control Unit ground connection from the frame, harness connections<br />
to the ECU, and other electronic components prior to welding on machine or attachments.<br />
Washing Precaution<br />
NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical components<br />
with water.<br />
CMW