FX25 Operator's Manual - Ditch Witch
FX25 Operator's Manual - Ditch Witch
FX25 Operator's Manual - Ditch Witch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Service - 80<br />
<strong>FX25</strong> Operator’s <strong>Manual</strong><br />
50 Hour<br />
Lube Blower Bearings<br />
Wipe two zerks clean and lube every 50 hours<br />
with HTG. Inject grease into zerk until clean<br />
grease comes out of relief fittings.<br />
NOTICE: Do not inject grease too quickly.<br />
Drive shaft seal damage could occur.<br />
Change Water Pump Oil<br />
Change oil after the first 50 hours of operation<br />
and every 100 hours thereafter. Change oil more<br />
frequently if working in dusty conditions.<br />
j32om045h.eps<br />
1<br />
• Drain at drain plug (3) while oil is warm.<br />
• Add NDO at fill (1) until oil is at halfway mark<br />
on sight glass (2).<br />
3<br />
2<br />
j32om046h.eps<br />
CMW