Download - Fuji Xerox Printers

• Scanning From the Operator Panel
The following procedure uses Microsoft ® Windows ® XP as an example.
NOTE:
• Ensure that the printer is connected to the computer using the USB cable.
• You must use Express Scan Manager on your computer to configure the output destination of the scanned
image files.
1 Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 114
2 Press the (Scan) button.
3 Select Scan to Application, and then press the button.
4 Configure the scanning settings as necessary.
5 Press the (Start) button.
The scanned image file is generated.
NOTE:
• If the following dialog box appears on your computer, select Express Scan Manager-Btype, and then
click OK. Once you select the Always use this program for this action check box when selecting
Express Scan Manager-Btype, the selected application is automatically used without displaying the
program selection window.
See also:
• "Express Scan Manager" on page 52
Scanning 140