Download - Fuji Xerox Printers

More documents

Recommendations

Info

• Mottle Problem The printed result has mottled appearance. Action Adjust the transfer bias. 1 Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance tab. 2 Adjust the setting for the type of print media being used. 3 Click the Apply New Settings button. If you use non-recommended print media, use the print media recommended for the printer. NOTE: • If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local representative office or an authorised dealer. 203 Troubleshooting
• Ghosting Problem The printed result has ghosting. Action Adjust the transfer bias. 1 Launch the Printer Setting Utility, and click Chart Print on the Diagnosis tab. 2 Click the Ghost Configuration Chart button. The Ghost Configuration Chart is printed. 3 Click BTR Refresh Mode on the Printer Maintenance tab. 4 Select the check box next to On, and then click the Apply New Settings button. 5 Click Chart Print on the Diagnosis tab. 6 Click the Ghost Configuration Chart button. The Ghost Configuration Chart is printed. The print media surface may be uneven. Try changing the Paper Type setting in the print driver. For example, change Plain to Lightweight Cardstock. 1 On the Paper/Output tab in Printing Preferences of the print driver, change the Paper Type setting. NOTE: Adjust the temperature of the fusing unit. 1 Launch the Printer Setting Utility, and click Adjust Fuser on the Printer Maintenance tab. 2 Adjust the fixing temperature by turning up the value for your printing media. 3 Click the Apply New Settings button. If you use non-recommended print media, use the print media recommended for the printer. • If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local representative office or an authorised dealer. Troubleshooting 204
Page 1 and 2:
DocuPrint CM205 b User Guide
Page 3 and 4:
Launcher (Windows Only) ...........
Page 5 and 6:
9 Troubleshooting .................
Page 8 and 9:
Preface Thank you for purchasing th
Page 10 and 11:
Types of Manuals Safety Guide Setup
Page 12 and 13:
• Organization This guide is orga
Page 14 and 15:
Safety Notes Before using this prod
Page 16 and 17:
Always switch off and unplug the ma
Page 18 and 19:
Do not incline the product at more
Page 20 and 21:
Do not apply excessive force to hol
Page 22 and 23:
• Warning and Caution Labels Alwa
Page 24 and 25:
Regulation • Radio Frequency Emis
Page 26 and 27:
Product Features This chapter descr
Page 28 and 29:
1 Specifications This chapter lists
Page 30 and 31:
Paper Tray Capacity Continuous Copy
Page 32 and 33:
Scan Function Type Original Paper S
Page 34 and 35:
2 Basic Operation This chapter incl
Page 36 and 37:
• Front View 10 12 3 4 5 6 15 141
Page 38 and 39:
• Operator Panel The operator pan
Page 40 and 41:
Turning On the Printer IMPORTANT:
Page 42 and 43:
Printing a Panel Settings Page The
Page 44 and 45:
• The Printer Setting Utility The
Page 46 and 47:
• Exiting the Power Saver Mode Th
Page 48 and 49:
3 Printer Management Software Use t
Page 50 and 51:
Printer Setting Utility (Windows On
Page 52 and 53:
Launcher (Windows Only) Using the L
Page 54 and 55:
4 Installing the Print Driver This
Page 56 and 57:
• Connecting Printer to Computer
Page 58 and 59:
Installing Print Driver on Computer
Page 60 and 61:
• USB Connection Setup The follow
Page 62 and 63:
• Installing the Drivers and Soft
Page 64 and 65:
5 Printing Basics This chapter incl
Page 66 and 67:
• Print Media Usage Guidelines Th
Page 68 and 69:
• Print Media Storage Guidelines
Page 70 and 71:
• Usable Print Media The types of
Page 72 and 73:
Loading Print Media Loading print m
Page 74 and 75:
• Print Media Dimensions The MPF
Page 76 and 77:
• Read the instruction sheet befo
Page 78 and 79:
NOTE: • Depending on the size of
Page 80 and 81:
• When Loading C5 Load envelopes
Page 82 and 83:
• Loading Print Media in the Prio
Page 84 and 85:
• When Loading Envelope #10, DL,
Page 86 and 87:
• To confirm the correct orientat
Page 88 and 89:
Operations on Your Computer The fol
Page 90 and 91:
Loading Print Media in the Priority
Page 92 and 93:
Setting Paper Sizes and Types When
Page 94 and 95:
• Setting Paper Types IMPORTANT:
Page 96 and 97:
• Sending a Job to Print Install
Page 98 and 99:
• Direct Print Using the USB Stor
Page 100 and 101:
Selecting Options for an Individual
Page 102 and 103:
Selecting Options for an Individual
Page 104 and 105:
• Printing Custom Size Paper (Win
Page 106 and 107:
• Checking Status of Print Data T
Page 108 and 109:
• Printer Settings This section i
Page 110 and 111:
• The Printer Setting Utility The
Page 112 and 113:
6 Copying This chapter includes:
Page 114 and 115:
Preparing a Document You can use th
Page 116 and 117:
See also: • "Setting Copy Options
Page 118 and 119:
• Number of Copies You can specif
Page 120 and 121:
• Collated You can sort the copy
Page 122 and 123:
• inch series 200% StmtLgl(154%)
Page 124 and 125:
• Original Type You can select th
Page 126 and 127:
• Sharpness You can adjust the sh
Page 128 and 129:
• Color Balance R You can specify
Page 130 and 131:
• Color Balance B You can specify
Page 132 and 133:
• N-Up You can print two original
Page 134 and 135:
• Margin Top/Bottom You can speci
Page 136 and 137:
• Margin Middle You can specify t
Page 138 and 139:
7 Scanning This chapter includes:
Page 140 and 141:
Scanning to a Computer This section
Page 142 and 143:
• Scanning Using the TWAIN Driver
Page 144 and 145:
• Scanning Using the WIA Driver Y
Page 146 and 147:
Adjusting Scanning Options This sec
Page 148 and 149:
Setting the Scan Resolution You may
Page 150 and 151:
8 Using the Operator Panel Menus an
Page 152 and 153:
• Report / List Use the Report /
Page 154 and 155: • Admin Menu Use the Admin Menu m
Page 156 and 157: Panel Alert Tone Off* Does not emit
Page 158 and 159: • Adjust Fuser Purpose: To specif
Page 160 and 161: • BTR Refresh Purpose: Specify wh
Page 162 and 163: • Service Lock Purpose: To specif
Page 164 and 165: • Reduce/Enlarge Purpose: To set
Page 166 and 167: • Color Balance G Purpose: To spe
Page 168 and 169: • Resolution Purpose: To specify
Page 170 and 171: • Image Compression Purpose: To s
Page 172 and 173: MPF NOTE: • Values marked by an a
Page 174 and 175: Panel Lock Function This feature pr
Page 176 and 177: • Disabling the Panel Lock NOTE:
Page 178 and 179: Setting the Power Saving Timer Opti
Page 180 and 181: Using the Numeric Keypad As you per
Page 182 and 183: 9 Troubleshooting This chapter incl
Page 184 and 185: • Avoiding Jams • Use only reco
Page 186 and 187: • Clearing Paper Jams From the Fr
Page 188 and 189: 4 Lower the levers to their origina
Page 190 and 191: 4 Lift and open the scanner. 5 Remo
Page 192 and 193: • Jam Problems This section inclu
Page 194 and 195: Display Problems Problem After the
Page 196 and 197: Print Quality Problems This section
Page 198 and 199: • Toner Smears or Print Comes Off
Page 200 and 201: • The Entire Output Is Blank If t
Page 202 and 203: • Pitched Color Dots If this trou
Page 206 and 207: • Fog Problem The printed result
Page 208 and 209: • Auger Mark Problem The printed
Page 210 and 211: • The Top Margin Is Incorrect Pro
Page 212 and 213: • Protrudent/Bumpy Paper Problem
Page 214 and 215: Adjusting Color Registration This s
Page 216 and 217: • Printing the Color Registration
Page 218 and 219: • Entering Values The Printer Set
Page 220 and 221: Scan Driver/Printer Utility Problem
Page 222 and 223: Understanding Printer Messages The
Page 224 and 225: Error-Code 092-310 Clean the CTD se
Page 226 and 227: Contacting Service When you call fo
Page 228 and 229: • LCD Panel Messages The LCD pane
Page 230 and 231: • Obtaining the Product Informati
Page 232 and 233: • The Operator Panel NOTE: • Be
Page 234 and 235: 10 Maintenance This chapter include
Page 236 and 237: • Cleaning the Scanner Keep the s
Page 238 and 239: • Cleaning Inside the Printer 1 T
Page 240 and 241: 11 Replace the other three toner ca
Page 242 and 243: Replacing Toner Cartridges Fuji Xer
Page 244 and 245: • Removing the Toner Cartridges 1
Page 246 and 247: 5 Pack the removed toner cartridge
Page 248 and 249: • Consumables IMPORTANT: • Use
Page 250 and 251: • Recycling Supplies • For envi
Page 252 and 253: Managing the Printer This section i
Page 254 and 255:
Conserving Supplies You can change
Page 256 and 257:
Moving the Printer NOTE: • The fr
Page 258 and 259:
8 Lift the printer and move it gent
Page 260 and 261:
11 Contacting Fuji Xerox This chapt
Page 262 and 263:
Online Services You can find detail
Page 264 and 265:
Index A Adjust Altitude 160 Adjust
Page 266:
Installing print driver (Mac OS X)
show all

Download - Fuji Xerox Printers

Create successful ePaper yourself

Delete template?

Save as template?