Download - Fuji Xerox Printers

• BTR Refresh
Purpose:
Specify whether to execute counter measures for curling/separating discharge of the paper.
Values:
Off*
On
Does not automatically execute counter measures for
curling/separating discharge of the paper.
Automatically executes counter measures for curling/separating
discharge of the paper.
• Initialize NVM
Purpose:
To initialize NVM for system parameters. After executing this function and rebooting the printer, the
menu parameters or data are reset to their factory default values.
See also:
• "Resetting to Factory Defaults" on page 178
Values:
• Non-Genuine Mode
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
• Using non-genuine toner cartridges may make some printer features unusable, reduce print quality and
decrease the reliability of your printer. Fuji Xerox recommends only new Fuji Xerox brand toner cartridges for
your printer. Fuji Xerox does not provide warranty coverage for problems caused by using accessories, parts,
or components not supplied by Fuji Xerox.
• Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Values:
System Section Yes Initializes the system parameters.
No*
Does not initialize the system parameters.
Off*
On
Does not use toner cartridge of another manufacturer.
Uses toner cartridge of another manufacturer.
159 Using the Operator Panel Menus and Keypad