Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
Download - Fuji Xerox Printers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Printing Problems<br />
Problem<br />
Job did not print or incorrect<br />
characters printed.<br />
Print media misfeeds or multiple<br />
feeds occur.<br />
Action<br />
Ensure that the Select Function screen appears on the LCD<br />
panel before you send a job to print.<br />
Ensure that print media is loaded in the printer.<br />
Verify that you are using the correct print driver.<br />
Ensure that you are using the correct USB cable and that it is<br />
securely connected to the printer.<br />
Verify that the correct print media size is selected.<br />
If you are using a print spooler, verify that the spooler has not stalled.<br />
Ensure that the print media you are using meets the specifications for<br />
your printer.<br />
See also:<br />
• "Usable Print Media" on page 69<br />
Fan the print media before loading it.<br />
Ensure that the print media is loaded correctly.<br />
Ensure that the paper width guides and length guide are adjusted<br />
correctly.<br />
Ensure that the PSI is securely inserted.<br />
Do not overfill the print media sources.<br />
Do not force print media into the PSI or the MPF when you load it.<br />
Otherwise, it may skew or buckle.<br />
Ensure that the print media is not curled.<br />
Load the recommended print side correctly for the type of print media<br />
you are using.<br />
The envelope is creased after<br />
printing.<br />
See also:<br />
• "Loading Print Media" on page 71<br />
Turn the print media over or around and try printing again to see if<br />
feeding improves.<br />
Do not mix print media types.<br />
Do not mix reams of print media.<br />
Remove the top and bottom curled sheets of a ream before loading<br />
the print media.<br />
Load a print media source only when it is empty.<br />
Ensure that the envelope is loaded as instructed in "Loading<br />
Envelope in the Multipurpose Feeder (MPF)" on page 78 or "Loading<br />
Envelope in the Priority Sheet Inserter (PSI)" on page 82.<br />
Page breaks in unexpected<br />
places.<br />
Print media does not stack neatly<br />
in the center output tray.<br />
Printer does not duplex pages.<br />
Increase the value for Job Time-Out in the System Settings menu,<br />
that is on the Printer Maintenance tab in the Printer Setting Utility.<br />
Turn the print media stack over in the PSI and MPF.<br />
Select Flip on Short Edge or Flip on Long Edge from the Duplex<br />
menu on the Paper/Output tab in the print driver.<br />
Troubleshooting 194