Download - Fuji Xerox Printers

• Color Balance G
Purpose:
To specify the default color balance level of green within the range of -2 to +2. The factory default
menu setting is 0.
• Color Balance B
Purpose:
To specify the default color balance level of blue within the range of -2 to +2. The factory default menu
setting is 0.
• Gray Balance
Purpose:
To specify the default gray balance level within the range of -2 to +2. The factory default menu setting
is 0.
NOTE:
• This option is effective only for black and white copying.
•N-Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off*
Auto
ID Copy
Manual
Does not perform N-Up printing.
Automatically reduces the original pages to fit onto one sheet of
paper.
Prints the original pages onto one sheet of paper in the original size.
Prints the original pages onto the one sheet of paper in the size
specified in Reduce/Enlarge.
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
4mm*/0.2 inch*
0-50mm/0.0-2.0 inch
Specify the value in increments of 1 mm/0.1 inch.
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
4mm*/0.2 inch*
0-50mm/0.0-2.0 inch
Specify the value in increments of 1 mm/0.1 inch.
165 Using the Operator Panel Menus and Keypad