LTO half-height SAS Tape Drives User Guide - Tandberg Data
LTO half-height SAS Tape Drives User Guide - Tandberg Data
LTO half-height SAS Tape Drives User Guide - Tandberg Data
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Attach mounting hardware<br />
Caution<br />
The <strong>LTO</strong> <strong>half</strong>-<strong>height</strong> drive only allows 3 mm of the<br />
engagement of the screw into the drive. If you remove<br />
an existing drive, do not assume the screws that you<br />
remove are the correct length for your new <strong>LTO</strong> drive.<br />
Always use 3 mm screws and use washers or shims<br />
to tighten, if necessary.<br />
Different models of server require different mounting methods. Always refer<br />
to your server documentation for details. The following diagrams illustrate<br />
common mounting methods. If mounting hardware is supplied with your tape<br />
drive, it may not be exactly the same as shown in the illustrations.<br />
March 2010<br />
#<br />
17
Change language