LTO half-height SAS Tape Drives User Guide - Tandberg Data
LTO half-height SAS Tape Drives User Guide - Tandberg Data
LTO half-height SAS Tape Drives User Guide - Tandberg Data
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 6–Operating your tape drive<br />
Loading a cartridge<br />
1. Arrow indicates leading direction<br />
3. Label area<br />
2. Cartridge door<br />
4. Ready LED<br />
Figure 6-1 Inserting a cartridge<br />
1. Lift the cartridge door and insert the cartridge into the slot in the front<br />
of the drive with the white arrow uppermost and facing the drive door.<br />
2. Apply gentle pressure until the drive takes the cartridge and loads it.<br />
3. The Ready light flashes green while the drive performs its load<br />
sequence. When the cartridge is loaded, the Ready light shows steady<br />
green.<br />
Unloading a cartridge<br />
Caution<br />
Never try to remove a cartridge before it is fully<br />
ejected.<br />
38<br />
1019257
Change language