LTO half-height SAS Tape Drives User Guide - Tandberg Data
LTO half-height SAS Tape Drives User Guide - Tandberg Data
LTO half-height SAS Tape Drives User Guide - Tandberg Data
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3<br />
Installing an external <strong>LTO</strong><br />
tape drive<br />
This chapter describes how to connect your tape drive to an external port<br />
on the host controller or new HBA. If you are installing an internal <strong>LTO</strong> tape<br />
drive, please refer to “Installing an internal tape drive ” on page 15.<br />
In this chapter:<br />
• “Connecting the tape drive to an external <strong>SAS</strong> port” on page 25<br />
• “Reboot the server ” on page 27<br />
Connecting the tape drive to an external <strong>SAS</strong> port<br />
1. If installing a new HBA, follow the instructions supplied with the HBA<br />
to install it and any associated drivers.<br />
March 2010<br />
#<br />
25
Change language