Ixia Black Book: SDN/OpenFlow

More documents

Recommendations

Info

Test Case: OpenFlow Switch Setup and Functional Test Figure 17: Open Flow Learned Info Trigger Settings window This feature allows you to monitor the switch status without logging on to the switch. In this example, you can view OpenFlow switch ports information like Tx and Rx packet counts, dropped packet, CRC, Frame alignment, Collision and Overrun errors. The Latency field shows the response time of the switch for the particular stat request. Figure 18: Port Stats tab showing OpenFlow switch ports information Troubleshooting Use following steps to troubleshoot any OF Channel issues: • Enure ARP is resolved under Protocol Interface. Also try to PING emulated controller IP (Ixia) from OpenFlow switch. • You can enable protocol trace from the trace window. PN 915-2635-01 Rev A December 2012 17
Test Case: OpenFlow Switch Setup and Functional Test To open the trace window, right-click on Controller Interface and then click Open Trace Window. On the trace window select the OPEN FLOW check box and then select the debug level from the list and click OK. PN 915-2635-01 Rev A December 2012 18
Page 1: ADVANCED MPLS Black Book Edition 8
Page 5: SDN/OpenFlow Contents How to Read t
Page 8 and 9: SDN/OpenFlow Dear Reader Ixia’s B
Page 10 and 11: Introduction - Software Defined Net
Page 12 and 13: Introduction - Software Defined Net
Page 14: Introduction - Software Defined Net
Page 17 and 18: Test Case: OpenFlow Switch Setup an
Page 25: Test Case: OpenFlow Switch Setup an
Page 30 and 31: Test Case: OpenFlow Switch Forwardi
Page 52 and 53: Test Case: Switch Flow Failover Per
Page 74 and 75: Contact Ixia Corporate Headquarters

Ixia Black Book: SDN/OpenFlow

Create successful ePaper yourself

Delete template?

Save as template?