Ixia Black Book: SDN/OpenFlow
Ixia Black Book: SDN/OpenFlow
Ixia Black Book: SDN/OpenFlow
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Test Case: <strong>OpenFlow</strong> Switch Forwarding Test<br />
5. Configure the Number of Interfaces as 1, by going to the Devices tab on the<br />
<strong>OpenFlow</strong> window. The number of interfaces should be equal to the number of<br />
emulated NICs of a controller.<br />
Figure 23: Device tab, <strong>OpenFlow</strong> window<br />
6. Go to the Interface tab of the <strong>OpenFlow</strong> window and assign the Protocol<br />
Interfaces that you created on the Protocol Interface window. This interface is<br />
used for the control-plane (OF Channel). Configure Number of Channels as 1.<br />
Figure 24: Interfaces tab, <strong>OpenFlow</strong> window<br />
PN 915-2635-01 Rev A December 2012 25