Ixia Black Book: SDN/OpenFlow

Test Case: Switch Flow Failover Performance Test
Create Traffic endpoints on host ports using the Generate Traffic Endpoint wizard. This
option is available on the Flow Ranges tab.
Figure 50: Flow Ranges tab
The following steps will help you use the OpenFlow Traffic Converter Wizard. This will
create the corresponding traffic end points for the Flow Range values on Ixia ports.
a. Select host ports where Traffic Endpoints will be created and click Next.
Figure 51: OpenFlow Traffic Converter Wizard – Port Select – Name window
b. Select both Primary/Secondary flow range to be included in traffic.
Figure 52: OpenFlow Traffic Converter Wizard – Select Flow Ranges - Name
c. Map the Traffic source port in the following figure Host-1, with DUT In port.
PN 915-2635-01 Rev A December 2012 52