Owner's Manual - Faria Instruments

Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow, Press
and hold the “Up” and “Down” buttons for 2 seconds to save
the selection and return to “Edit” mode.
Press “Up” or “Down” to select another function or “Mode”
to return to “Normal” mode.
Set Pitot Select
Press and hold the “Up” and “Down” buttons for 2 seconds
to select “Pitot Select.”
Press “Up” or “Down” to select another function.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow, Press
and hold the “Up” and “Down” buttons for 2 seconds to save
the selection and return to “Edit” mode.
Press the “UP’ or “Down” button to select another function
or “Mode” to return to the “Normal” mode.
Perform Master Reset
Press and hold the “Up” and “Down” buttons for 2 seconds
to select “Master Reset.”
Press “Down” to select another function.
NOTE: Caution, this function will reset all values changed
in the “Edit” mode to the factory default settings.
Press and hold the “Up” and “Down” buttons for 5 seconds
to perform the “Master Reset.”
“Master Reset Performed” will be displayed on the screen
after the Master Reset has completed.
Press “Mode” 2 times to return to the “Edit” mode.
Set Tank2 Name
This function is used to name the auxiliary tank.
Press and hold the “Up” and “Down” buttons for 2 seconds
to select “Tank2 Name.”
Press “Up” or “Down” to select another function.
1
2
3
4
5
Select
Helm
Helm 2
> Helm 1
1 Pitot
Select
2
1
2
3
4
5
Select
Pitot
200 PSI
> 100 PSI
1 Master
Reset
2
1
2
3
1
2
3
Hold
Up + Down
To Reset
Master
Reset
Performed
1 Tank2
2 Name
Page 23