Raychem Heatshrink Products - RB Racing
Raychem Heatshrink Products - RB Racing
Raychem Heatshrink Products - RB Racing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Molded Parts — Accessories<br />
shrinkHOoP (Continued)<br />
Specifications/Approvals<br />
RW<br />
Y<br />
X<br />
L<br />
X 1<br />
Product Dimensions<br />
Inches (millimeters)<br />
Part<br />
No.<br />
URHR-1<br />
URHR-2<br />
URHR-3<br />
URHR-4<br />
URHR-5<br />
I.D. I.D.<br />
O.D. Length Wt. (gm)<br />
Expanded Recovered<br />
(Y) Ref. (L) Ref. Ref.<br />
(X1) min. (X) max.<br />
1 .08 0.25 0.5<br />
[25] [2.1] [6] [13]<br />
0.75<br />
1.23 .10 0.375 0.5<br />
[31] [2.6] [10] [13]<br />
1<br />
1.44 .14 0.5 0.5<br />
[37] [3.6] [13] [13]<br />
1.5<br />
1.85 0.18 0.562 0.75<br />
[47] [4.7] [14] [19]<br />
3.5<br />
2 0.20 0.812 0.75<br />
[51] [5.1] [21] [19]<br />
5<br />
Notes<br />
a) Recovered length will allow for<br />
1.91 [0.075] either side of the<br />
collar, minimum in most cases.<br />
Typical shrinkHOoP Grommet<br />
Performance<br />
Property Performance Test Method<br />
Tensile strength 1500 psi (10.3 Mpa) ASTM D-412<br />
Ultimate elongation 250% minimum ASTM D-412<br />
Specific gravity 1.4 maximum ASTM D-792<br />
Water absorption 0.5 % maximum ASTM D-570 A<br />
Flammability Pass ASTM D-635<br />
Corrosion resistance Pass ASTM D-2671 A<br />
Physical<br />
Low temperature flex<br />
Pass<br />
ASTM D-2671 C<br />
4 hours at - 55+/-1°C [67+/-2°F]<br />
Heat resistance<br />
200% ultimate elongation,<br />
minimum<br />
ASTM D-2671<br />
168 hrs at 175+/-1°C [347+/-2°F]<br />
1200 psi (8.3 Mpa) tensile<br />
strength, minimum<br />
Heat shock<br />
4 hrs at 225+/-2°C [437+/-5°F]<br />
No cracking,<br />
dripping or flowing<br />
ASTM D 2671<br />
275% minimum expansion<br />
to 4 inch (10 cm) of a fully<br />
recovered test specimen,<br />
Elastic Memory — and 93% recovery of expanded —<br />
specimen after oven<br />
conditioning for 1 minute<br />
at 150+/-2°C[302 +/- 4°F]<br />
Dielectric strength<br />
200 v/mil (7880 v/mm)<br />
Electrical<br />
minimum<br />
ASTM D-876<br />
Volume resistivity 10 14 ohm-cm minimum ASTM D-257<br />
200% ultimate Elongation,<br />
Chemical Fluid Resistance — minimum 1200 psi (8.3 Mpa) ASTM F-146<br />
tensile strength, minimum<br />
10<br />
Heat-Shrink Tubing,<br />
Molded Parts and Adhesives<br />
Catalog 1308940 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514<br />
Revised 5-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102<br />
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151<br />
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171<br />
10179