Raychem Heatshrink Products - RB Racing

Single Wall Tubing
RP-4800 (Continued)
Product Dimensions
Inside Diameter
Recovered Wall
Size Minimum Expanded Maximum Recovered Thickness**
as Supplied After Heating After Heating
No. 1 25.4 [1.000] 7.0 [0.275] 1.14 ± 0.18 [0.045 ± 0.007]
No. 2 50.8 [2.000] 14.0 [0.550] 1.14 ± 0.18 [0.045 ± 0.007]
No. 3 76.2 [3.000] 20.6 [0.810] 1.14 ± 0.18 [0.045 ± 0.007]
No. 4 101.6 [4.000] 26.7 [1.050] 1.14 ± 0.18 [0.045 ± 0.007]
No. 5 25.4 [1.000] 11.7 [0.462] 1.14 ± 0.18 [0.045 ± 0.007]
No. 6 60.3 [2.375] 17.3 [0.680] 1.14 ± 0.18 [0.045 ± 0.007]
No. 7 76.2 [3.000] 21.3 [0.840] 1.14 ± 0.18 [0.045 ± 0.007]
No. 8 95.3 [3.750] 23.6 [0.930] 1.14 ± 0.18 [0.045 ± 0.007]
No. 9 114.3 [4.500] 36.8 [1.450] 1.14 ± 0.18 [0.045 ± 0.007]
No. 10 38.1 [1.500] 9.5 [0.375] 1.14 ± 0.18 [0.045 ± 0.007]
No. 11 19.1 [0.750] 4.6 [0.180] 1.14 ± 0.18 [0.045 ± 0.007]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information
Standard Black (-0)
Color
Nonstandard
White (-9), red (-2), blue (-6), yellow (-4), green (-5), brown (-1),
orange (-3), violet (-7), gray (-8)
Size selection
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On spools or in 1.2-meter [4-foot] lengths.
Ordering description*** Specify product name, size and color (for example, RP-4800 No. 1-0).
***Europe only. For supply to MIL, Def Stan and BS add -MS, -DS or -BS to ordering description.
10
Heat-Shrink Tubing,
Molded Parts and Adhesives
Catalog 1308940 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 5-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
10023