You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LUBRICATION<br />
Lubricate the points shown here, with either motor oil or regular<br />
grease, in accordance with the Periodic Maintenance Chart or<br />
whenever the vehicle has been operated under wet or rainy conditions,<br />
and especially after using a high pressure spray washer. Before<br />
lubricating each part, clean off any rusty spots with rust remover and<br />
wipe off any grease, oil, dirt, or grime.<br />
General lubrication<br />
- Clutch lever (A).<br />
- Front brake lever (B).<br />
- Rear brake pedal (C).<br />
- Rear brake rod joints (D).<br />
- Shift pedal (E).<br />
(D) (C)<br />
(A) (B)<br />
EC FSE 2003 -43-<br />
(E)<br />
Use an aerosol cable lubricant with a pressure luber:<br />
Apply grease to the<br />
following point<br />
throttle inner<br />
cable upper ends.
Change language