to download our current GENERAL catalog! (5MB ... - Whitehorse Gear

Auxiliary Power Fuse Panels
Centech’s AP-1 Fuse Panel is extremely compact
(3.0 x 2.4 x 1.25 in.). Just mount the panel,
then attach positive and negative wires
between the panel and power source. The AP-1
provides power for up to eight individual circuits
up to 60 amperes total load. Very cool lugless
terminals make circuit connections fast and
easy. No additional fasteners or terminals needed. Holds 5 ATC fuses.
Features both positive and negative buss connections to make wiring your
accessories a breeze.
The Centech AP-2 allows some of your electrical gadgets to be switched
off and on with your ignition key, but other electrics such as a Powerlet
socket, to remain “hot.” The same compact size and features as the AP-1 but
featuring separate sections for both switched and unswitched circuits. This
arrangement allows for tremendous flexibility in powering and protecting
your electrical gadgets.
You may want to consider a proper relay and wiring kit for either the AP-
1 or AP-2 Fuse Panels. If you want all the circuits on the AP-1 Fuse Panel to
switch off with your ignition, order relay kit AP-1R. If you would like some
of the circuits on your AP-2 Fuse Panel to remain on at all times and others
to switch on and off with the ignition, order relay kit AP-2R. Wire is also
included to operate the relay from a low current “trigger” source such as a
tail light. These kits work very well with CANBUS as well as conventional
motorcycle electrical systems.
AP1 Fuse Panel AP1 $64.95
AP2 Fuse Panel AP2 $69.95
AP1R Relay Kit $39.95
AP2R Relay Kit $44.95
Best Seller!
“Neat, tidy kit which fits easily under bike seat or side panels.
Stops your battery terminals looking like spaghetti! And a lot safer too
as each accessory fitted then has its own fuse.” —reviewed by “Onedrop”
Fuse Block
Face it. We’re adding more electrical gadgets to our motorcycles all the time.
Pretty soon your battery terminals look like a wire fire waiting for a place to
happen. Install a fuse block to organize and protect your wiring.
Our fuse block is a top-quality polycarbonate unit with sockets for six
standard ATO or ATC blade fuses. Only 1.5 inches thick, less than 5 inches
long, and 3.25 inches wide, it will fit many locations.
Maximum of 30 amperes per circuit and 100 amperes total at 32 volts
DC. Use AP1R relay kit (at left) to switch your fuse block off and on with
your ignition. Very heavy-duty and a great price!
FUSB $45.50
NEW!
Posi-Lock In-Line Connectors
We’ve been savvy to Posi-Lock
Connectors for years. We know
these are the best connectors
you’ll ever use. They require no crimping or special tools. Instead they simply
hand tighten. They are so good, they’re completely reusable! Used by
major manufacturers and the US military alike, you know they are the best!
Choose the correct Posi-Lock for your wire gauge. Red for 18-24 AWG
wire, blue for 14-16 AWG, and yellow for 10-12 AWG. Then strip 3/8-inch
of the wire to be connected, insert and hand tighten. Repeat for the other
end and you’re done. Sold in 9-piece packages of red, blue, and yellow
Posi-Locks as well as an assortment containing all 3 sizes. Also available
Posi-Tite (POSW) waterproof connectors in Red 18–20, or Blue 14–16.
POSL Red, 18–24 $7.95
POSL Blue, 14–16 $7.95
POSW Red, 18–20, 3-pk $7.95
Cyron Solid State LED Bulbs
These bulbs feature a standard
1156 or 1157 bulb
brake/tail light base and are
five times more energy efficient
than incandescent.
These bulbs produce very little heat and contain
no mercury. Each bulb is 1.74 x 1.05 inches and
contain 24 LEDs on top and sides for a bigger,
wider glow. Can be used with clear lens covers.
1156A 1156 Bulb, Amber $9.99
1156R 1156 Bulb, Red $9.99
1157A 1157 Bulb, Amber $9.99
1157R 1157 Bulb, Red $9.99
POSL Yellow, 10–12 $7.95
POSLA Assortment $7.95
POSW Blue, 14–16, 3-pk $7.95
NEW!
Posi-Fuse Fuse Holder
If you’re doing custom
electrical work
on your bike you
might need to add
a fuse somewhere. That usually means having to
make ugly splices to connect a fuse holder with
it’s own wiring to your wire harness. Not any
more. With the Fuse-It fuse holders, you can
install a fuse holder cleanly, just strip, insert,
and tighten. Pow! And there’s your fuse holder.
Like other Posi-Products, it’s reusable too!
Fuse-It works with 12-18 AWG wiring
and holds standard blade type fuses.
Fuses not included. Package of 2.
POSFH $7.95
Why Posi-Locks With Posi-Products it’s finally possible to easily make
dependable, reusable, wiring connections. And you can do it fast, without
any tools other than wire strippers or a pocket knife.
Keeping a few Posi-Locks on hand with some Posi-Taps
and Posi-Twists is a sure way to know you can tap or connect wires
anytime at all with no drama. With these revolutionary connectors it
doesn't matter if you're in a well-lit workshop or (we hope not) by the
side of the road at night in the rain. You'll get a proper, reusable
connection every time!
Posi-Twist Connectors
When inline wire connections are not
needed (as with Posi-Locks), Posi-
Twist wire connectors are a fantastic
choice. Join two or several wires at
one point with Posi-Twist connectors. Simply strip the wires to be joined
1/2-inch, twist them together, insert, and hand-tighten. That’s it!
Posi-Twists might seem similar in function to old-fashioned wire nuts
but they’re not. Wire nuts are designed to connect non-stranded wires in
electrical boxes that don’t move, don’t vibrate, and are never exposed to the
rough environment of motorcycling. Posi-Twists provide a whole new level
of wire security and connection integrity. Don’t use wire nuts on your bike!
We’ve seen it and it’s very sad. Sold in 14–24 gauge Blue only. 18 pieces.
POSTW $7.95
NEW!
NEW!
NEW!
Posi-Tap
Connectors
A very common
garage task is the need to “tap” a hot wire, to provide
power for a new electrical accessory. Usually
it’s a pain to do it well. Not any more! Posi-Taps
make it fast, clean, simple, and secure. It’s almost
like cheating but we don’t care!
Posi-Taps tap wires without cutting and can
power multiple leads with a single tap. Total wire
integrity is maintained. They are reusable or permanent.
They offer low resistance, are vibration
proof and fully insualted! Just insert the hot wire,
tighten, strip the new wire lead, insert and tighten.
You’re done! Choose Red 20–22, Blue 14–18,
Black 12–18. 6 pieces per pack.
POST $7.95
54 ELECTRICAL Order Toll-Free 1-800-531-1133