Eagle Plus User's Guide - Rain Master Control Systems
Eagle Plus User's Guide - Rain Master Control Systems
Eagle Plus User's Guide - Rain Master Control Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
RAIN MASTER TM EAGLE PLUS<br />
Setting Program Start Times<br />
1. Each program can have up to 8 start time<br />
assignments. START TIME 1 is selected by<br />
default.<br />
2. Turn the Dial to choose HH:MM. The start time<br />
will default to 12:00AM with the hour digits<br />
selected (blinking).<br />
3. Turn the Dial to set the start time hour, then<br />
press the Dial to enter. The minutes digits will<br />
begin blinking. Set the start time minutes and<br />
AM/PM designator in the same manner.<br />
4. START TIME 2 is prompted as START TIME 1 is<br />
entered. Continue to assign up to 8 start times<br />
for this program as preferred.<br />
5. When finished, choose and select OK,<br />
or press the NEXT key to display the<br />
STATION RUN TIME setup screen.<br />
Note: To clear the displayed start time, choose and select the DELETE option.<br />
Assigning the Station Run Time<br />
Note: If the CYCLE AND SOAK option was selected for the program, continue at<br />
Setting a Cycle and Soak Station Run Time on the next page.<br />
1. STATION 1 is selected by default. To change the<br />
station number, press the Dial to select. Turn<br />
the Dial to display the preferred station number,<br />
then press the Dial to enter the selection.<br />
2. Turn the Dial to choose the station run time<br />
value, then press the Dial to select. The hours<br />
digit is selected and will begin blinking.<br />
NEW PROGRAM: 1<br />
TOTAL START TIMES:1<br />
START TIME[1]<br />
-HH:MM - -DELETE-<br />
NEW PROGRAM: 1<br />
TOTAL START TIMES:0<br />
START TIME-1-<br />
[12:00AM] -DELETE-<br />
NEW PROGRAM: 1 -OK-<br />
TOTAL START TIMES:0<br />
START TIME-1-<br />
[ 6:15AM] -DELETE-<br />
NEW PROGRAM: 1 -OK-<br />
TOTAL START TIMES:1<br />
START TIME-2-<br />
[HH:MM ] -DELETE-<br />
NEW PROGRAM: 1<br />
STATION [ 1]<br />
RUNTIME-00:00-<br />
NEW PROGRAM: 1<br />
STATION - 1-<br />
RUNTIME[ 0:00]<br />
3. Turn the Dial to display the preferred run time<br />
hours (0–23), then press the Dial to enter. The<br />
minutes digits will be selected. Turn the Dial<br />
to select the run time minutes (0–59), then<br />
press the Dial to enter.<br />
4. The next station number in sequence will be<br />
prompted. Continue to assign additional<br />
stations to this program as preferred.<br />
NEW PROGRAM: 1<br />
STATION- 1-<br />
RUNTIME[ 1:15]<br />
NEW PROGRAM: 1 [OK]<br />
STATION- 2-<br />
RUNTIME-00:00-<br />
38 Setting Program Start Times and Station Run Time
Change language